You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
1 start with old headliner for a pattern carefully cutting it apart
2 trace the parts onto the desired material, I used signplast for it's...
-
Installing a petronix unit is simple this is a slant but the 8 is the same.
Remove the points and condenser and primarly lead, can be done...
-
So I had an idea on this new fuel tank. Weld in a bung for a tank vent/roll over protection valve on this stock 66’ fuel tank. Fuel puking can be...
-
I have just downloaded my latest DIY videos on restoring our Door Window Assemblies to YouTube.
Part 1 shows how to remove the entire assembly and...
-
I have just downloaded my latest DIY videos on restoring our Door Window Assemblies to YouTube.
Part 1 shows how to remove the entire assembly and...
-
I recently rebuilt a 69 Barracuda Wiper Motor. I took a bunch of pictures to help me get it back together, but I only thought to write a How-To...
-
12/10/21- A friend challenged me to do this mopar project, so here goes. I picked up a '69 Mopar 383 HP core and rebuilt it the way it should be...
-
I'm an info guy and like gathering information... I first started a spread sheet on Chrysler factory V-8 engine specs back in the early 2000's...
-
I have devised a very simple homemade tool that anyone can fabricate in minutes that will greatly ease the installation of your new dipstick tube...
-
Our good buddy, @pittsburghracer was kind enough to post this chart, so I thought I would add it here in the How To section so it will be easily...
-
We've had enough interest in how to leave feedback for buyers and sellers on this site that I shot this video yesterday morning. I hope yall find...
-
First of all I have to give credit to all the members of this forum who assisted me in this task. My task was to remove and rebuild the door...
-
It's so simple and cheap, I don't know why I've never seen it posted before; but after seeing yet another ad looking for the hard-to-find MP...
-
67 Dart
Grab center medallion cap and twist counter clockwise while holding the horn ring and steering wheel from turning.
On 69 Dart with...
-
Found this on the web and it is a simpe explination on how a points ignition system works.
The Primary Circuit
With the contact breaker points...
-
started with laying the top unfolded over a table in the full sun. helped more with the wrinkles. I then placed it on the top of the dart and...
-
NOTE: Many of the photos differ from the the description, as I was using materials I had on hand.
Purchase 2 12x12x40 lamp boxes from U-Haul...
-
I read a lot of conflicting information prior to changing to the 1.03 Bars.
When all said in done it was pretty easy, Here are steps I used:
1...
