Interior & Trim
-
Cardboard Headliner Replacement
- waggin
- 1 min read
- Views: 2K
- Reaction score: 1
1 start with old headliner for a pattern carefully cutting it apart 2 trace the parts onto the desired material, I used signplast for it's... -
How to Restore a Mopar A-Body Door Window Assembly: Part 2
- Ag1753
- 1 min read
- Views: 1K
- Reaction score: 1
I have just downloaded my latest DIY videos on restoring our Door Window Assemblies to YouTube. Part 1 shows how to remove the entire assembly and... -
How to Restore a Mopar A-Body Door Window Assembly: Part 1
- Ag1753
- 1 min read
- Views: 2K
- Reaction score: 1
I have just downloaded my latest DIY videos on restoring our Door Window Assemblies to YouTube. Part 1 shows how to remove the entire assembly and... -
How to Remove Horn Medallions
- Dana67Dart
- 1 min read
- Views: 2K
- Reaction score: 1
67 Dart Grab center medallion cap and twist counter clockwise while holding the horn ring and steering wheel from turning. On 69 Dart with... -
Fuzzies window trick!
- mocarJoe
- 1 min read
- Views: 4K
- Reaction score: 2
If you've removed a front window of an A body you've seen the piece of trash plastic with hints of fuzzy attached and it's on the front of the... -
Headrest Removal
- DustyEd
- 1 min read
- Views: 2K
Just want to help anyone out by telling how I removed my bench seat headrests out of my 1970 Duster 340. These headrests have one long (RH) and... -
Step-by-Step '67 Rallye Gauge Cluster Overhaul/Audio System Upgrade
- 67fish383S
- Updated
- 14 min read
- Views: 8K
- Reaction score: 7
This is a step-by-step documentation of my instrument cluster overhaul project. Not all steps may be applicable to your project. Mine included... -
Quarter window Regulator installation
- dartgts340
- 1 min read
- Views: 5K
- Reaction score: 12
1) install the floating roller into the long slot of the window mount. I should mention that in the picture the roller is upside down the black... -
How to fix a Defroster hose
- halifaxhops
- 1 min read
- Views: 4K
- Reaction score: 6
OK my 64 cuda Defroster hose is in bad shape. Fixed it on the cheap without wrapping tape around it. Car wrap, just need to find flat black... -
Instrument Cluster Restoration Tips , 1967-72 A-body , 1970-76 A-body
- BLKNBLU340DSTR
- Updated
- 3 min read
- Views: 12K
- Reaction score: 7
Some of our restoration costs are not within our budgets, but will work for driver quality cars. So, we need to get creative. Here are a few ideas... -
Carpet Holes Made Easy
- Syleng1
- 2 min read
- Views: 7K
- Reaction score: 9
This is a bit more detailed than other posts about installing a carpet. Part of installing a carpet is making the holes in the carpet for seat... -
General Instrument Bezel Repair with Mods
- I8NEMO
- 3 min read
- Views: 8K
- Reaction score: 2
This bezel was pretty rough. I removed all paint and chrome via careful wet sanding and brushing. I heard brake fluid would have done the job... -
Bucket Seat Restomod: Cadillac CTS seats in a 69 Dart Convertible
- Daddio340
- 6 min read
- Views: 7K
- Reaction score: 2
Purpose: To install seats with integral shoulder harnesses in a convertible 1969 Dodge Dart for improved crash safety and comfort. Mechanical... -
A great chart for radio id.
- halifaxhops
- 11 min read
- Views: 11K
Identifying Car Radios 2580 766 MoPar 1968 Imperial Search tune AM PB radio 2580 786 418 Mark 1 MoPar 1968 Imperial T&C AM PB radio... -
Seat relocation brackets installation instructions.
- AussieDart
- 3 min read
- Views: 7K
All the credit for this goes to Peter Bates. The brackets supplied by Year One are a great product but come without instructions. Peter did his... -
Vinyl Head Rest Restoration
- blewbyoutobad
- 3 min read
- Views: 6K
- Reaction score: 10
I recently added bucket seats to my 69 Swinger restoration. I bought a pair of used 68 buckets with headrests. My interior is white and the... -
Cluster. Make your own Custom Gauge cluster
- Dodge73Dart
- Updated
- 3 min read
- Views: 15K
- Reaction score: 37
Today Karen and I decided to spend some quality time in the shop making our own custom dash cluster. Since we had the ability and the shop there... -
HOW TO -- Glove Box Latch Removal
- Yote
- 1 min read
- Views: 5K
- Reaction score: 1
This was on my '72 Demon's keyless latch. I don't know if it's the same as the keyed latch. 1.-- Remove the two screws holding the latch in place...
