You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
So I had an idea on this new fuel tank. Weld in a bung for a tank vent/roll over protection valve on this stock 66’ fuel tank. Fuel puking can be...
-
Here is a video I made to help you to restore your Mopar Gas Tank and related system to include: Gas Tank, Fuel Sending Unit and wiring. It shows...
-
Bought a 63 tank from AMD on a closeout sale. I wondered if the 63 model would work in a 64-44 with a different suffix on the part number. Well, I...
-
OEM Fuel Sender Repair 1967 Dart
by Herb Beer “Dart67”
This is a step by step of how I repaired the Original Equipment Manufacture fuel sender...
-
Check this video out about how to choose a carburetor for your motor from BAD *** Racing. Great article that goes into detail about choosing...
-
Pulled a Holley electric red pump off the shelf to put back in action, thing is it's been sitting for 12yrs... so it's going to need a go...
-
Ok there have been a few posts asking about this lately. If you don't use the proper bracket for the Mopar, and just the universal one that comes...
-
Here I'm going to show you how to modify a standard "dead head" Holley reg to a full bypass type.
Here is the stock regulator in pieces, you can...
-
This will be a sticky and be locked when done. Please begin another thread for comments. Thanks.
I am building this 850 Thermoquad for Jeremy...
-
Since our friend NightMoves was burglarized, I offered to send him a carburetor. So, I thought what better time to to do this than now? I am going...
-
There always seems to be a lot of questions relating to carburetion, especially questions such as which carburetor to use or how much cfm the...
