Search results for query: *

Long story short. Bought back my first car some years ago (-66 Barracuda) and I traded it for a motocycle with my son. Now I’m helping him with restoration of the car. There’s quite a bit of rust on the car so there is were the work is in progress at the moment. Since we are switching the...

Anybody who knows if these caliper piston will fit -66 KH 4-piston calipers? Scott Drake C5ZZ-2196-A Scott Drake Brake Caliper Replacement Components | Summit Racing Many thanks in advance Swedefish

Been following Make it Kustom for a while. Learn something in almost every video.

Hi guys. We have a problem with the wifes Sebring/Stratus 1999 2.5 l V6. It got a severe fluid leakage somewere. It’s very hard to judge were the leak comes from. One posibility could be the power steering pressure switch. Does any of you guys experinced a leak from/thrue the pressure switch? Is...

….wind vane. Home made, only downside. It have to be near storm to make it ”run”

Found this at a local store, just had to buy it.

Finally got the Sniper efi installed. First start up a couple of weeks ago. Took it for a test drive last saturday. The of idle bog is gone. Snappy throttle respons. Quite a difference from the 750 edelbrock carb. Can’t wait for the spring to arrive.

Anybody else who follow Clay on YouTube? Great channel, and to follow a Top Fuel team

Hi guys Have a question. How do I measure the size of a brake booster? When it says 8” is it the diameter or? Many thanks in advance Swedefish

Asking for a friend of mine. Can he expect a new engine block when buying a crate engine?

A friend of mine is looking for a stock damper for a -77 440 with cast crank. Anyone of you guys who has a good used or new damper for sale or can give a lead for where to find one? He gave 440source a call but they couldn’t help him. He also made a phonecall to Damper Dudes without succes. Any...

Went to pick up a 5.9 Magnum today. This will end up in my former -66 B-cuda. My son and I made a trade, he got the fish and I got his bike a Yamaha xv1700 Warrior. I never got to build the fish and he want a US made car to enjoy. Anyway, the plan is to put a Vortech SC with a Fitech efi in it...

This carb sits on the sons 360 la, seems as it miss a rod. Haven't worked with holley carbs before. Been searching the web for id on the carb but can't find anything but that it maybe was used on among others the 360 la engine. Some pics Any help is appreciated as usual.

I'm looking for frames and floors for my ( and soon to be ny sons) -66 Barracuda. I'm almost 99% sure if that I've these parts on the net for a while ago, or have I mixed up the years? Does any of you guys know where to shop for the parts?

I´m out of clue, the wifes Sebring just refuse to start all of a sudden. It cranks but won´t start. Attached a OBD reader, but it didn´t detect any codes. It´s strange though, earlier it made this beeping sound with the key in the ignition switch and with the door open. Now it just beeps once...

Helping a friend with his Satelitte. It's a 440 auto. He has a electronic ignition on the motor. It doesn't ignite when cranking the engine. I've helped him with replacing the electric harnesses both under dash and in the engine bay this winter. When attaching the timing light to the wire from...

I've got this 360 LA engine in my -66 Cuda. The waterpump pulley and crank pulley doesn't line up and more they interfere with each other. The engine got the waterpumphousing with passengerside water outlet. Now I need to buy new pulleys. Does any of you guys have info on which pulleys I should...

Would it be safe to run a engine in a teststand with only the converter attached to the crankshaft? Thanks guys

When using a degree wheel with 90 degree only. My first reading BTDC reads 44 degree and the second reading ATDC reads 79 degree. Here´s where I gets confused. Do I ad 90 to the 79 readings to calculate the numbers where the cam is installed? Any help is appreciated. Just checking the cam...

Have had roller rockers installed in the 383 engine. After a couple of minutes when the lifter preload been set I can rotate the pushrod with the finger tips at the bdc. Before I set the preload I had the sparkplugs removed and had the engine turned over by the starter to have the lifters...

This was what was waiting for me after I got home from work:thumbsup:

I found this Fish for sale today on a Swedish website . Does anyone notice something differernt or odd with the Barracuda. http://www.classiccars.se/classic/b_detalj.asp?txtLopnr=70766&txtVar=1 Btw the price is in Swedish crowns not USD.

Does any of you guys have any experince of these rocker arms /kit? http://www.ebay.com/itm/MOPAR-383-400-440-Aluminum-1-5-Roller-Rockers-PLYMOUTH-/220588964351#vi-content

Has anyone of you guys heard of a car as of this ad. From a Swedish web site. http://www.classiccars.se/classic/b_detalj.asp?txtLopnr=59549&txtVar=1

May be old, but I haven`t seen this before. The Greatest R/C Car Chase Ever - YouTube

My son and his wife are in Palmdale CA, any suggestion on activities for this coming week in the area? Any respond is appreciated.

I´m about to buy a set of seatbelts from the US for my -67 Fastback. Since there are two lengths of seat belts I´m not sure which one to buy. Anyone got any info of the length for a Fastback? 60" or 74"? Any help really appreciated. Lenny

I want to thank tolscuda for the help with a combined shipping of parts, from different vendors, to Sweden. Don´t know how much, but it sure saved me some money to combine the shipping. A great member of FABO. Lenny/ Swedefish

Been struggling with an issue on our PT Cruiser. It got a bad missfire from time to time when warm. Have turned the ignition key on and off three times to get any fault code but says "done". Today when going to the store I put the gaspedal to the floor but it stopped revving at 4k rpm (even...

Asking for help with shipping to Sweden. I´m about to buy two items from different sellers on e-bay. So, too reduce the shipping costs I was thinking on the option to combine the shipping to Sweden. The shipping is free within the States, I would have the items shipped to someone in the US and...