Search results for query: *

Looking for a set of tail lights with nice bezels and a tail panel moulding for my 74 swinger. The pic attached is for reference, not my car. Please send pics and a price shipped to 63026 or I can pick up close to Fenton, MO. Thanks!

I'm hoping you electrical gurus can help diagnose my problem. I just got the motor back in my dart and it ran awesome for about an hour! I started it at least 5 times, but now I turn the key and get nothing. I've done a ton of reading on the forum and did a few tests. I tried grounding the...

I need someone to double check my wheel and tire combo before pacing an order. My car's in a million pieces, so I can't really take any useful measurements for the foreseeable future... Trying to collect as many parts as I can before it warms up. For the wheels, i'm planning on cragar soft 8's...

I'm probably gonna pull the trigger soon on the 2300 for my 225. I have a super six intake that I would have to open up a bit to make it fit. If anyone's running this set up, what do you think? What are you using for fuel delivery? I hear their external fuel pump is junk, but I also noticed...

Hey guys! I might be swapping the 7 1/4 in my 74 dart swinger /6 904 with an 8 1/4 BBP rear end. I can get it from either a 75 slant six duster with a 904 or a 76 slant 6 dart sport with a 4 speed. Would my current drive shaft work? Is there anything else I would need from the parts car to make...

Hey Guys! I recently got a 3D printer and started this thread to show off some of the cool stuff I've been making with it. On the off chance I do ever get around to putting my interior back together, there a LOT of plastic pieces that I have that are just too far gone to use. Here are some pics...

Well, I paid the extra money to buy the AMD quarter skin for my 74 dart. Now I think that wasn't the right decision... The main reason I went with AMD was because they are the only company I could find that advertises the correct marker light location for a 72 - 76. Turns out that the location...

Will I have any issues swapping the 4-speed and rear end from a 1965 barracuda into my 74 dart? I may be able to get one at a reasonable price, but want to make sure the parts will swap over before I look at the car. I know I would need a new bellhousing to fit my slant, but what about...

I am shopping for a passenger side quarter panel for my 74 2 door swinger. Who do u guys recommend buying from? I think amd would be the best way to go.

I'm shopping for a mig welder in the $400 range, what are your suggestions? I'm looking for something better than the harbor freight welder that won't break the bank...

I have had the dash out of my dart for about a year and I don't plan on putting it back in until I have the body work finished and paint the car. Until then what is the best way to start the car? It's gonna be at least a few years before I'm ready to put it all back together and I don't want it...

This dash cap is brand new and even comes with the adhesive to mount it to your dash pad. It is perfect outside of the small crack pictured in the corner. I know that it will fit my 74 swinger but am unsure of other years. The cap is located in st. Louis MO and I would rather not ship. I'll...

I'm looking for a front windshield and a good bench seat for my 74 dart swinger. I will be at monster mopar in st. Louis this weekend if anyone is going and has the parts that I'm looking for.

For those of you who don't know, I am a senior level mechanical engineering student and have been assigned a project for my Thermal Systems class. We have to design any kind of thermal system that we choose and I convinced my group to design a turbo system for my 74 dart with a 225 /6 & 904...

I am going to be putting my dash back together shortly and will need a working gas gauge. Please pm me with a price shipped to 63114 if you have one that you could sell. I am only interested if you are 100% sure the gauge works. Thanks for looking.

http://m.comedycentral.com/tosh_blogstory.rbml?id=http%3A%2F%2Ftosh.comedycentral.com%2Fblog%2F2011%2F11%2F30%2Ftattoo-artist-shts-on-his-ex-girlfriend%2F&alt=http%3A%2F%2Fm.comedycentral.com%2Ftosh0.rbml&xrs=synd_facebook&cid=300

So, I have been looking at those dash pad caps that simulate the actual dash pad for my 74 swinger. There are a few different sellers of them on ebay and the price difference is pretty big. I was wondering if anyone has had any experience with this seller...

Over the winter I will be restoring my dash since it is small enough to be done in the heated basement while the rest of the car is frozen in the garage. Everything has been taken apart and I was hoping to get help on a few questions. 1. What have you used to re-paint over the peeling chrome...

I acquired a super six intake, exhaust manifold, carter BBD, and some brackets. The guy that I got it from said that he wasn't sure if the kickdown linkage that he threw in was correct or not and I was hoping that someone here could confirm. The brackets that came on the manifold also look a...

I know it's not an a-body, but Im trying to help a friend fix a rust hole on the left side wheel arch on the bed of his 03 Ram 1500. Does anyone know where I can get the best price on a replacement panel? It's too new of a truck to find in a junkyard around here and I don't want to trust a...

I know a lot of you also have Dakotas so I thought I would post the doors here. The outside of the doors are in primer and will need sanding before they are ready for paint. The filler panels were welded in by someone who retired from Chrysler as a welder. The doors do not come with windows...

I am looking for floor pans for my 74 swinger and Rock Auto seems to have the best deal. Has anyone used them and would you recommend them? I need to replace all four pieces.

Does anyone know where I can find a vacuum hose diagram for a 74 Dart? I have looked and can't seem to find one. I even have a Chilton's manual and it's not in there. Thanks in advance!

I purchased a 1974 Dodge Dart Swinger a few weeks ago for $500 and finally got it home over Memorial Day weekend. Overall it seems to be a really solid base for a project. It will need new rear quarters, left side trunk extension, and at least a few patches in the trunk pan. There are also a few...

Some of you may already know from my "Welcome Wagon" thread, but I just purchased a 1974 Dart Swinger project car. I have been trying to deode my fender tag and have most of the codes figured. I was wondering if you guys (and gals) could help me out with the rest. Here is what I have so far...

I am looking for 10 right hand lug nuts, with or without washers, for Cragar SS small bolt pattern wheels. They will be going on a 1974 Dart Swinger. I figured that a few of you might have a few of these laying around. If you have all 20, I might buy all of them if the price is right. Thanks in...

I know that the Cragar SS wheels don't have traditional lug nuts and was wondering if you guys have had any luck finding them in local auto parts stores. If so, which one? I just got a set of wheels that someone had on a late 60's dart so 10 of the lugs are left hand lug nuts. Since I'm putting...

I've been lurking the forum for a while and have always wanted an A body. Well, I finally have the chance to own one. It's a 1974 Dodge Dart Swinger with a 225 /6 and auto transmission. My Uncle got it on a trade and is selling(practically giving) it to me for $500. It is a factory A/C car with...