Search results for query: *

I'll be assembling a 360 Magnum shortly here to drop in my '83 W150. This is my first time putting together an engine that didn't go into a motorcycle of some sort, so please bear with me. What I've got: junkyard 360 Magnum shortblock, re-using the stock cam re-manufactured heads from Allied...

Hi All, Been a while since I sold my Duster due to good old life changes, but recently picked up a '82 W150 with what I was told was a LA based 408 in it. I got a ton of help from this group when I had my Duster, so figured it was a good place to start. What I know about the motor: Cam...

Looking for a Holley 750 DP carb to try in place of my 750 VS. Don't mind if it needs a rebuild.

Question for you all, that I seem to find conflicting answers on. Will a thrust block in an open 741 interfere with my Yukon axles with green bearings? I have a 3.92 SG in there now, thrust button removed, but in the next few weeks i'll need to tackle a 600 mile road trip and was thinking...

So I have a MP 360 Magnum Crate engine. Its the 390 HP version with the R/T heads and 9:1 CR. cam: 230°/234° @ .050" 0.501"/0.513" Lift and it has the M1 single plain intake on it. The engine still seems to run strong and be in good shape, but of course more is always better, I guess I caught...

Wondering if anyone out there is looking to part with an RPM Air Gap for a magnum headed engine. I have an M1 on now that I would be willing to trade after the fact if I like the dual plane better. Of course id pay up front, but could gurantee first dibs on my M1.

My details: 360 Magnum crate 390 hp R/T heads 230°/234° @ .050" 0.501"/0.513" Lift 107* lsa 4spd 3.91 gears Holley 80508s vacuum secondaries MSD Ignition 25 initial 34 total one light blue spring and one light silver spring 50cc Accerlerator pump, currently playing with squirters to get rid of...

Should my PCV valve be 'buzzing'? The check ball that's in it seems to vibrate back and forth and it appears to be causing a bit of a vacuum leak. When I manually plug the valve my o2 meter drops down almost a whole point richer, when I let it loose it jumps back up. I read there are...

So bare with me, I'm new to this :) I bought my Duster and it had and electric fuel pump mounted on the rear frame plumbed inbetween the existing lines of the gas tank and the origianl metal line that runs up to the engine bay. I'm not sure what fuel pump it is, but its leaking, and has always...

willing to separate the slicks... on my local craigslist. this is my stuff OBO http://burlington.craigslist.org/pts/3775907627.html

So, I bought my Duster with a 390hp 360 crate in it and am trying to get it all dialed in correctly. The distributor looks to tall, the number 5 wire hits the lower bolt of the wiper motor when advancing the timing... Looking at the part # on the dizzy its PN - 8589 MSD Pro-Billet, looking it...

Hey guys, I'm going to be getting an AF gauge and was wondering what you guys recommend from experience. My plan was to weld a bung in each exahaust tube and compare sides. I was thinking something like this : http://www.innovatemotorsports.com/products/MTXL.php thanks!

I would like to hear you're suggestions for a new carb for my setup for my duster. I've got a 360 magnum crate engine 390hp, 4 speed non OD, but with the low first gear, 3.91 rear, but may try a 3.23. The car is strictly for the road. I have a 750 holley vacuum on it, and am not the happiest...

LOL First World Problems - YouTube

I have a '72 duster which the PO bought 15x8 American Racing Outlaw 2 rims for, I don't mind the look, but the tires hit the fender lips in the rear. I believe the rims have 3.75 inch backspacing and the current tires are 270/60/15. I just took the old leaf springs with long rear shackles out...

Has anyone ever used one of these? I'm leaking some gear oil from inside the bellhousing, figured it must be comming from the input shaft seal. http://www.brewersperformance.com/proddetail.asp?prod=ISRS-23&cat=269 How involved is it to install?

This is a newly rebuilt 833 non OD with the 3.09 first gear, running 90 weight gl-4 gear oil I'm having trouble with second and want to now if I should just baby it and hope it smooths out, or if something is really wrong. Here are some main points. 1) I can sit in the car with it running...

I have a Holley 80508-3 (http://www.holley.com/data/Products/Technical/199R9934-3.pdf) on my 390hp 360 magnum crate engine, I want to up the jets in it a touch, because the plugs look a bit lean. The porclins white around the electrode and the groud stap is pretty light. I have the stock 70...

So, my setup is as follows: MP 360/390HP magnum crate engine cam specs. 288°/292° Advertised Duration (230°/234° Duration @ .050") 0.501"/0.513" Lift 9.0:1 compression. 4 speed car. I have an MSD Pro billet ready to run distributor with the two heavy springs and the blue bushing in it to...

Have any of you ever had a back up light switch go bad in your 833? Mine seems to be shorting out, every time I put the transmission in reverse it pops the fuse, but if I take the plug off the two prong switch at the transmission and jump it all is well with the backup lights and the fuse. I...

I'm completing a auto to manual swap and have ordered a new carpet for my duster. The carpet for sale is an aftermarket carpet for an auto with a cutout for a floor mounted shifter, its two piece and in good shape. I'll try to post some pictures of it tomorrow. $70 + shipping OBO. located in...

I'm looking for some help before I buy some more parts I can't use :banghead: What I've got is a 360 magnum engine in a '72 duster, origianly a 318 car. When I bought the car it had a federal pump on it, but the pulley on the pump was a keyed pulley that had been tack welded on the shaft of...

Looking for the pulley from a v8 car with the federal style pump. This is the press on type of pulley, I have the /6 version now.

I'm looking for the two wired plug that goes onto the reverse switch on an 833 transmission, the one that has two prongs. I don't need the entire harness, just the cap/plug with the enough of the two wires to splice into my existing wiring. Just looking to avoid buying the entire thing from...

What is the general feeling around re-using gears. Can a set of gears that have been broken in on 1 carrier be used on another?

Has anyone ever taken up TTi on their 2 year ceramic coating warranty. Their website says to send your headers with a from to Engineered Applications, and they would decide if they would do the work or not. I'd hate to ship my headers across country just to be denied the warranty. I bought my...

B&M 10242 weighted for a 360 magnum engine. I bought this new back in april. $70 shipped U.S. or Canada.

I'm looking for a model 1.06 powersteering pump with the pulley. Would need it shipped to 05060. thanks!

B&M I think. Was on my 360 Magnum. stamped 10239. SFI Sticker date is December of 2005 $65 shipped Canada and lower 48.

I think 1.25 inches thick. $70 shipped CA and lower 48.