Search results for query: *

I have a '69 Dart that has a few suspicious splices and randomly cut wires that I'd like to ensure get properly sorted out. I have the B&W diagrams from MyMopar, but I was wondering if there were any colored versions floating around here. Thanks!

Would a '69 Dart have come with a vented fuel tank? I haven't been able to look mine over well, but I do recall a vent tube running along the filler neck inside the trunk. Would this be the right tank for me? Fuel Gas Tank 18 Gallon for Dodge Dart Plymouth Barracuda Valiant 192659123923 | eBay

This popped up for sale locally and I couldn't pass it up for some reason. 318/904 car, air conditioning, power steering and not a lick of rust. The previous owner daily drove it from 1998-2002, it appears to have sat since then. Gas tank is junk, carb was gunked up and it looks like they had...

I am looking for a pair of front fender trim pieces for a '69 Dart custom - driver quality. In addition, I need a full set of four interior door panels [tan].

DynoJet inertia dyno I've street tuned the car completely and wanted to see where I was at and to make some minor adjustments. I started at about 340whp/350wtq and picked up a few more of each. Ended at 354whp and 365wtq. There's a little more left in it if I can clean up my intake air temps...

One of the best parts about going to a MegaSquirt ECU is the amount of customization you can do. It would be a bit cumbersome if you only used it for spark and fuel. To get the most out of it, I am using the VR output shaft sensor on my T56 Magnum transmission along with a Hall Effect undriven...

The following table is a lightly adjusted timing table from EFIsource, mostly just around the idle cells and it seems to work well in that area. My 'Cuda has 100 or so miles on it and I am feeling more interested in tweaking the tune for power, since the drivability is sorted out pretty well...

Mine is just getting on the road and I am going through some initial tuning. I am running a Megasquirt MS3 Gold Box and a cable throttle body. Posting this up in case anyone has some questions about the swap that I could maybe help answer. IMG_3616 by GoodmanPics, on Flickr IMG_3614 by...

I am looking for input on those that have a car plastic intake and a cable driven throttle body, how did you route your throttle cable? Packaging seems far from ideal, I'll have to get creative from what it looks like.

Hello All, I would like to see your air filter assemblies on car intake Hemi conversions. I am trying to wrap up everything that might need holes before I ship my car to paint and perhaps there is a trick air filter setup out there I could upfit before do that. Can I see your engine...

I have picked up a '05 Truck engine that was supposed to be good, turns out it wasn't, so I was planning on using the accessories off of it on the reman 5.7 I now have. I have a car timing cover and was expecting to be able to use the truck alternator and a/c compressor, it's looking like...

I am looking to see if someone can help me line out a parts list for a T-56 Magnum behind a 5.7L Hemi. I'm having a hard time in my research with people discussing a T-56 versus the T-56 Magnum [Aftermarket TR6060]. I am sure there are some similarities between the two, but I would like to have...

Dad and I got em out for some pics lately :-D

:read2: First off, I am only interested in owning a fire arm for personal and home defense. Not interested in collecting, competition, etc. I am currently 20 years old, 21 in September. Few good friends of mine carry with their concealed weapons permit out in Nevada, I feel it's a good idea...

Tried out the new front tires and alignment today :D Had to go down Challenger Ct 8)

I currently have 3 options as far as exhaust goes on my car. I have only 'tracked' it with 3" turndowns right after the headers. I don't make it out to the track much, looking to see what my best bet is, according to the pros. 1) Summit headers, 3" TTI Turndowns after collectors 2) Summit...

Going to the track next sunday with a local Crate Hemi Challenger, his friends Olds and my Car. I'll probably be the slowest of the bunch :screwy: Of course hoping to go a hair faster, anyone wanna take a shot at it? :read2: Last Outing Cooler Weather- 60' - 1.95 330' - 5.62 1/8 -...

I have had a 650cfm Thunder AVS on my 318 for about three years now. Its a slightly worked over 318, 3500stall, 3.91s, it currently runs mid 13s, when it was jetted too lean. The issue I am having right now is one bowl on the carb is getting sucked dry on heavy throttle, even sometimes...

I picked up a aluminum radiator from a friend of mine he decided not to use. It looks too small for an e, b, probably even a late A body. I was wondering what size aluminum radiators were being put in these cars? Thanks! -Mike

Anyone interested in going to Orlando Spinworld....err i mean Speedworld one of these Friday nights, post up and we'll work somethin out :thumbup:

PM me with what cha have :thumbup:

Went for a good run around town all day today. :pirate: Im lovin the look :mrgreen::glasses8:

I'll be needing to roll my fender lips the best i can. Without spending $300 on a fancy tool to do it. I do have painted 1/4s I'd like to keep from cracking. Option one i've heard is cutting a few slits in the lip and using hammer/dolly to get the bend started. Then a block of wood on the...

Anyone give an estimation on what different weight oils do for pressures? I'm not looking to change, just for my own knowledge. I currently have 15w-40 75psi - cold idle/cruise 35psi - hot idle 65psi - hot cruise 10w-30? 10w-40? 5w-20? Thanks :headbang:

Came in yesterday

:toothy7:

Had a few tornadoes rip through last night, check in if your in the area :thumbup:

And a cheap ebody tuff wheel lol. Just wrote what i did to my car on a couple things that some people have been curious on. i know i was sketchy on the relay wiring for the headlights. hope it helps anyone out. http://www.goodysgotacuda.com/HowTo.html :)

Since i dont have a car around these days. i got bored lol Lets see a holley and carter carb, mopar clock, challenger poster, mats plates, stock chrome sb valve covers, dodge division hubcap, super six lid, plates from five of my six cars. pair of MP black and polished valve covers...

Just wondering who is local on here since im new to the area :thumbup: