Search results for query: *

I am moving down to SoCal at the end of June - I need my Demon gone by then. I think $4000 is an extremely fair price. I just need it out of here. Here's the listing: It started as a six-cylinder/auto/7.25” rear end car, but I replaced it with a 1998 5.9L Magnum from a Jeep Grand Cherokee...

In Park or Neutral I can rev the stuff out of the 5.9L Magnum engine in the Demon to even almost 4K and snap my foot off the pedal and the RPM plummets but settles normally at about 850RPM just fine. However, when I do the same in gear (either holding the brake or moving forward), the...

This Demon started as a six-cylinder/auto/7.25” rear end car, but I replaced it with a 1998 5.9L Magnum from a Jeep Grand Cherokee 5.9 Limited. The new engine is mated to a Torqueflite 904 automatic transmission that shifts strong and feeds to a 1968 Coronet 8.75” rear end with...

Hey all, I am currently in the process of taking preorders for shadow/light t-shirts that I've created. Currently, there are only 3 preorders for the 70/71 Duster that I have listed, but I figured if there was any place to post this, it would be FABO. Basically, I need 12-23 preorders for...

This 1971 Dodge Demon started as a slant-six/auto/7.25" rear end car but now boasts a (dynoed) 340bhp 5.9L Magnum engine backed by a Torqueflite 904 three-speed automatic. It runs beautifully and shifts strong. It has a bench seat brown interior, power steering, and is column-shifted. It also...

I visited a guy last night with a gold 73 Gold Duster shell for sale. He asked me if I'd list it for him. The body is in cherry condition except for three areas - driver's side rear point (at the tail panel joint) has been smashed a tiny bit and the driver's fender has a couple pinholes 1"...

As the title says, I need TWO (2) BBP steel wheels in either 15x7 or 15x8 with backspacing no lower than 4.5". Please email me at [email protected] if you have any, state your username from FABO, and a price. I'd love to get them within 200mi from 95616, but if I need to, I'll have some...

Can someone break down timing an engine (specifically a 5.9 Magnum) to something I can understand? I'm kind of stupid about this stuff. I thought I understood timing, but I realized that much of my engine's issues could stem from bad timing and too much/little advance, so I would like to retime...

I frickin' hate my car, its engine, the multiple carburetors I've gone through, and everything that goes along with it. I am more than halfway to selling the piece of sh*t. Yes, I am using "strong language." No, I don't care right now. :angry7:

Hey all, I just realized the power steering pump and bracket I have is missing some parts. I absolutely need the two smaller bracket pieces (red arrows) and to a lesser degree, the bolt spacer (blue arrow). I am willing to pay $20+shipping for these brackets (and hopefully the spacer)...

http://kleinconcept.com Check it out! :cheers:

Woohoo, got my registration processed today! Anyone else going?

Well, this morning started off like ****. I want to be honest, so I used the s-word. But this afternoon, after work, I dusted off the old Demon (no, I didn't actually dust it off though :toothy10:) and took it to a meeting of a local motorsports club that I am a part of. As I rolled up I got...

I just want to thank Motor68 for being a really cool guy. I had been contacting Jim through craigslist and through FABO for a while now, threatening that I was actually going to, gasp, pick up his power steering pump and bracket for sale. It ended up me not having the cash at the right time...

And do you have a digital copy of the order form? I want to see each box on the order form (but I don't care if you black out the info). Thanks!

Could you in '71 order a 340 Demon with a stripe delete? Inquiring minds just want to know.

I am looking for some miscellaneous items. If you can help me out, please PM me! 1. column shift knob (black with machine-turned center) 2. two 15x7, 15x8, or 15x9 steel wheels with no pitting or rust damage 3. power steering bracket for small block (either Saginaw or Federal is fine)

My car didn't come with this piece, so I am looking for one in fairly good condition. From what I see, these are black with a turned center? Let me know via PM or email (sharpie1k at gmail.com) if you have one. Please include a photo or two and price including shipping to 95616. Thanks!

I made a mistake I'd like to correct again - I replaced my column shifter for a floor shifter, but I want to go back to column shift. The column shift is still there, but I need all the linkage from the shifter tab on the transmission to the shifter tab on the steering column. This includes...

Let's see, first I have to wake up at 6:45 instead of my usual 7:15am to get ready for work. Why? Because I have to take my girlfriend, who I only see once every two weeks due to cost of travel, to the airport so she can get back to work in Irvine. I take her to Sacramento International...

I went to Wally-World and Target for some stuff yesterday, and happened upon these guys: There's a 69 Hemi Daytona, a 70 FM3 Super Bee 440/6, the green 1971 Demon, and Dick Landy's AF/X 65 Coronet. cool stuff!

I think someone's avoiding me!:bootysha: Ben, if you're reading this, can you give me a call or PM? You're unreachable recently!

I decided that since there aren't enough shirts with Mopar-related items on them, that I'd make some. You can choose which style shirt and which design you'd like and order right from Cafepress and have it shipped to your door. Check back often, as I will be updating the designs with more...

The deals there are awesome. Picked these up on Friday for $40. Brand-new, they'd been sitting in the guy's garage since he got 'em. He's a Chevy guy and never had a use for them 8)

Alright, my Magnum roller motor's being a giant PITA.:angry7: One problem is coming after another, and I can't seem to work through one to get to the next one. If anyone has some experience with engines and some time to sit down with me and my engine and offer me some guidance, I'd be much...

Is a tapping sound normal? I've checked rocker arm torque, and there doesn't seem to be any preload (.000"), but I still have this pretty fast tapping. I don't even know where to start looking. It's kind of quiet, but very fast; probably a similar speed to the RPM. Would a lifter tick be...

I'm throwing out a feeler for my 71 Demon. It's GF3 Light Green Metallic. Originally a slant six/column auto car, but now it has a 1998 5.9L Magnum engine, 904 transmission with floor shift (no console, just the mechanism). It has no trunk floor but has galvanized steel riveted into place...

Waggin made it into Mopar Action this issue under 'Readers Rides' or something like that (72 GTX prototype on the cover). Also, there's a Fish owner from Rocklin, CA, which is about 30 miles from me. Congrats if he's a member, too.

After all this fun with a snapped rocker arm bolt and bent pushrod (loose rocker arm bolt, I think), I fixed the valvetrain and fired 'er up again. Sounds great, no issues mechanically with the motor (360 Magnum). The fuel, however, is a being a brat. Some of you know that a couple weeks ago I...

I am trying to gauge the interest in a rendering of a 1970-71 Dodge Dart. If there's enough, I'll finish the rendering and add it to my list of prints. Of course, if you have one, changes can/will be made based on your specific needs. Just wondering who'd be interested.