Search results for query: *

Hey guys, When I bought my 75 duster the guy had put in new floors and just put sheet metal in the trunk. He cut out where the spare tire would go, so now my trunk floor is flat. Does anyone else have this problem? Thanks,

I put a 76 440 motorhome in my 75 duster. I am looking for a reasonably priced aluminum radiator. Any thoughts? It is stock except for the intake . Thanks Guys!

Hey guys I have a 75 duster and looking for a good carb. The motor is a stock 440 out of a motor home. Anyone have this carb?

It’s on a75 duster.

Does anyone have pics of the sidewinder hooked up to a 727 from under the car? I'm having a hard time installing the bracket to the trans. It doesn't seem correct to me. Installing it in a 75 duster with 440. Thanks

Can you please tell me what these boxes are and what they do. I am putting a 440 in my 75 duster. Cause if it’s for emissions can I just leave them unplugged.

I have a 75 Duster and I'm swapping out the old big brake booster with a new dual 7" booster and cylinder. I have it set up with the same arm length. When I go to put the booster on the bracket, the threaded rod is too long. Do I cut it? It came with no instructions.

what do you guys think steel or black?

What am I missing? I’m guessing it’s a spacer. Trying to put my alternator on this afternoon. Hey no luck.

Anybody try this floor shifter? BM 33VB12H Floor Auto Trans Shift Lever Kit Fits 1970-1976 Plymouth Duster

I’m trying to find the wire that goes to the starter post. I don’t see plug for these plugs. Thanks for your help!

My project so far!

I have a 75 duster and need help figuring how the wires run under the dash? And where does the fuse box go? Anyone have any diagrams or pics?

I have a 75 Duster. I have the dash out. Does anyone know what this piece is in the pic? It’s hinged. I’m trying to figure out my wiring to go in the dash. Is this where the fuse box goes?

The wiring diagram I got for my 75 Duster shows some wires in the wrong place. In the pic they’re a fuse able link that is cut off on plug s to z. Can anyone tell me where that goes to? Also the diagram shows a black and yellow wire going to the horn from Z but my wiring shows a green and black...

Hi all, I tried to install a dipstick tube in a 440 but the tube would not go in. Is there a trick to putting them in? Got the one for a 440. Thanks, Sid

Morning fellow mopar lovers. I'm putting 440 in my 75 Duster, can I use the power steering hoses from the 75? Any help would be appreciated! Sid

Original proportion valve from a 75 Duster do I need that plastic tool to bleed the brakes? Or is that for the newer-style valves? Thanks, Sid

Will my power brake booster fit when I put my 440 into my 75 duster with schumaker swap mounts? I just finished painting my car and getting ready to reassemble the car. The booster that was on the car had brake fluid leak out of the vacuum hole when I was sanding it for paint I don't think this...

Has anyone bought paint or hi-build primer from the vendors at Carlisle in Pa? Any reviews would help. Thanks for the input.

It looks like my original parking brake cables from my 7 1/4 will work with my 8 3/4. Any thoughts? My 8 3/4 came out of a 66 coronet b body that I moved the perches into the a body measurements. Thanks

Hi guys, I bought a 66 coronet 8 3/4 axle 741 open case for my 75 Duster. I also bought a 489 sure grip and green bearings. Now I'm broke, Ha ha! My question is, do I have to remove the thrust plug or can I leave it in? If I have to remove it can you point me in the right direction as to the...

Looking for an 8 3/4 rear. I am going to the junkyard that has older cars. What should I look for at the junkyard when I cannot get under all of the cars because of the tall grass or tires are gone and they are laying on their frames. Is there a way to decode the VIN that will tell me what rear...

Hi, I have a 75 duster and I'm putting in a 440 with a 727 trans and the rear is a 7 1/4. I just picked up a 8 3/4 from a 64 polara with tapered axles for free. I plan on doing the conversion where you separate the drum from the hub for easier brake work. I got the axles out and plan on changing...

Hello, I have a 75 duster and putting in a 440 with a 727 trans and I have the 7 1/4 rear in it now. I read somewhere that a 68 to 70 b body axle would work and bring out the wheels a little better. My question is I found an 85 8 1/4 rear out of a fury would that fit? Does anybody have the...

Hi guys, I'm swapping a 440 in my 360 Duster and changing all the seals and gaskets. And of course, while trying to take out the rear main seal it came out in pieces- the old rope seal. I removed the crankshaft tonight and noticed the 1 and 2 caps were switched and that the notches in the...

I just bought a 75 Duster with no motor or trans. It originally had a 318 in it with an AT Trans. I want to put in a 360 with an 833 4spd trans manual. Where do I start finding parts? I'm having trouble locating parts and I don't know what donor cars to look for that will fit what I'm looking...

I just bought a 75 Duster with no motor or trans. It originally had a 318 in it with an AT Trans. I want to put in a 360 with an 833 4spd trans manual. Where do I start finding parts? I'm having trouble locating parts and I don't know what donor cars to look for that will fit what I'm looking...