Search results for query: *

I found this sick fish in a barn about 7 years ago. I pulled it out with a tractor and a chain. It shows 79,500 on the odometer. It still had the certicard under hood where bought new. 273 engine / 904. I have since put in new trunk pan and rear lower quarter patch panels. New shocks, gas tank...

Hey guys, help this old guy out. I have a nice rebuilt, 30 over, 318. It is just a long block. My 67 Cuda has a 273 2 barrel engine. Will all my brackets for power steering and alternator, starter, etc. fit the 1971 318 engine and are the engine mounts the same? Since I'm asking questions, what...

How do the retainers go on to hold the calipers on? And, what are those rubber bands for in the kit? Thanks guys, all this stuff was apart when i obtained the swap items. Any pics would be appreciated. (swapping out drums to disc on 67 Barracuda, using 73 Duster disc.)

Okay guys, I hate to ask a question on here that has been beat to death, but I searched and couldn't find what I needed (on brake pedal push rod), so here it is: Going to install a 73 Duster Power Master Cylinder (no booster) with 15/16 bore on my 1967 Barracuda Fastback. Will the existing...

Changing my front brakes to disc on my 67 Barracuda to 73 Duster big bolt pattern. I have everything but new tie rod ends. I need them for the Duster right? I notice the price is a lot higher on Cuda verses the Duster. Both are 9/16" correct? Also, no reason why I can't put the calipers in the...

Hey guys, I need help. I asked this same question to Denny's drive shaft and they told me no such animal was made. Here is my plight: 7 1/4 rear trashed in my 67 Barracuda Fastback with 273 engine. I had a excellent 8" Granada rear that bolts right in place (I'm changing to 15" steelies and...

OK, anybody out there know if the front fender emblem off of a '66 cuda is the same as the '67 ? I just bought an emblem off of Ebay and when it came in, it is the emblem for the tail panel. Too big for the fender! Does anyone have a fender emblem for a 67? All I need to complete my daughters...

This has been answered a 100 times i'm sure (forgive, cause i'm old) I am swapping brakes to my 67 Cuda from73 Duster. Can i just use the master cylinder reqiured for manual disc brakes? I have a good booster, but wasn't sure of the degree of difficulty. I also have the proportioning block from...

Okay, I have the rotors from a 73 Duster (machined down to fit my Bullitt Wheels) and the upper and lower control arms, spindles, etc. These will go on my 67 fastback cuda. Can i get away with just changing the upper arm now and put the new Duster lower joint in along with the new spindle and...

Need help form you wheel gurus! 1964 1/2 Barracuda has been restored to the original specs, close as possible, can anyone tell me if the steel wheels, 13", were painted black on the outside and silver on the inside? OR, were they completely black? Sounds crazy, I know, but seems like I seen/read...

Hey guys. Good friend is building a 65 custom Barracuda. (He doesn't do the computer thing). Does anyone make headers for the 225 / 6 besides clifford performance? They are big $$$$$$. OR, does anyone have a set for sale? Thanks, cybrtygr32

I found a 1988 Dakota rear that has the 10 bolt cover. It is out of the truck. The spring perches are the same as my 67 Fastback Cuda's (give or take a 1/8th or so). It is 62" outside hub to outside hub. This is what I need to get my 17 x 8 Bullits with 245 45 rubber under the rear almost...

Ok guys, help! Phoned Yearone and they say that 1967 front and rear gaskets are not available. Steele rubber show them on their site, but installation print out on site leads me to believe it could be a '68 instead of the '67. What have yall done in the past when needing this item. Yearone guy...

Okay, you rear end scholars, are the early Dakota rears 7 1/4 on 4 and 6 cylinder models or do they have a larger ring gear? Just curious. Couldn't locate on internet.Would they be any stronger than the A body 7 1/4? Looking for wide width to take on Bullit wheels without spacer use on 1967...

Hey guys, any Barracuda freaks posting from the North Alabama area. I have a 1967 Fastback that I'm thinking about restoring/modifying as soon as I get my 32 Ford 3WC done. Need front (both the same) bumper. Gadsden area. Mike

OK guys. Give me the low down on windshield gaskets. I have a 1967 Barracuda Fastback and steel rubber and soft seal don't list a gasket for this car. The '68 can be used if you use the reveal molding ($$$$$$$) by putting on the studs and clips. Somebody please tell me if all 68 and 69's had the...

Hey guys, will all early 318/360 intakes fit my '67 273? Have 2 barrel and want to go with 4 barrel holley. Most mags listings always start with the 318 engine and not the 273. thanks for the help Mike in Alabama

Whats the chance of me getting 17 x 8 Bullits with 245 x 45 under my 1967 Barracuda Fastback. It has a 8" ford rear, 58" flange to flange. Would 1.25 spacers do it? Don't really want to relocate springs. Then there is the front.........! (These were apparently off a 2005 GT stang.) Most are...