Old Man Mopar
Righteous Dude
This is how we roll at the shop.
Grillin on the Grill.
Ran out of propane and had to go to plan B.
Hey! No fair practicing for the Nat's grill-off ahead of time!
This is how we roll at the shop.
Grillin on the Grill.
Ran out of propane and had to go to plan B.
Got the radiator and fuel cell back from the local tig welder so I can move forward with that stuff again.
Sorry for bugging you tonight Denny. I had always wondered where that piece belonged and thought I would see where it went during assembly. I thought it might have been a new fangled strut rod of some sort. It all became crystal clear after our conversation. I'll add that piece to my mental catalog of parts.
Mocked up the passenger side so hopefully I can figure out if the wheels I want to use will fit or not.
Also have to come up with some UCA shims and cut the factory bump stop mount off.
Working on our transmission mount plan.
One way is super clean but means cutting a chunk out of the frame to weld in a plate that has nuts welded to the back side of it.
The other is to create a mounting plate out of angle iron and gusset it.
Here is the tranny mount bar cut down to size.