cudaspaz
Well-Known Member
Was playing around today and decided to see what i could come up with to make my scoop functional.
I know it's not the prettiest apparatus but I think it will work pretty good.
Cut out some aluminum sheeting, not fun, an riveted the air cleaner base to it, and later sealed up the seam underneath with some ultra black.
Was not fun cutting the hole with a roto zip bit.
Not gonna see the ugly, not so round hole ha, ha.
Fits nicely and won't move side to side with vibration
Air filter fits on nice and snug.
Tommorow I am running to Summit to get the K+N air filter and X-treme breathable lid.
I am going to put some hood scoop foam on the perimeter of the base plate to seal it all off, hopefully I won't have to mess with jetting after this.
Opinions welcome, yes I know it's hideous, but I like it cause it's different and a very simple set up.
I know it's not the prettiest apparatus but I think it will work pretty good.
Cut out some aluminum sheeting, not fun, an riveted the air cleaner base to it, and later sealed up the seam underneath with some ultra black.
Was not fun cutting the hole with a roto zip bit.
Not gonna see the ugly, not so round hole ha, ha.
Fits nicely and won't move side to side with vibration
Air filter fits on nice and snug.
Tommorow I am running to Summit to get the K+N air filter and X-treme breathable lid.
I am going to put some hood scoop foam on the perimeter of the base plate to seal it all off, hopefully I won't have to mess with jetting after this.
Opinions welcome, yes I know it's hideous, but I like it cause it's different and a very simple set up.