superdart426
Banned
Need a wiring diagram for HEI ignition any help appreciated thanks ....sd426
And here is a thread , same as doing a /6 http://www.forabodiesonly.com/mopar/showthread.php?t=214400
does anyone have the complete wiring picture with a GM COIL PLEASE...
does anyone have the complete wiring picture with a GM COIL PLEASE...
Worth mentioning, that in the diagram of the HE18 coil, the two TOP terminals (red) are in reality the SAME TERMINAL
The two bottom---(red) are also the same terminal. In reality, the coil only has three terminals as does any other coil............
hi volt
coil pos
coil neg
I have a coil that has a 3 wire connector on it...trying to figure where I connect the wires from the original harness that would go to the coil.....I appreciate all the help !!
Trailbeast,,forgive me,,but I still don't understand,,,a,b,c come from the coil and go to the module on one side??? where do the wires from the cars harness connect to using this style coil..on the round coil they just connect to the studs I know.. also what do I do about the ballast resistor????
Actually, TB, if I'm not mistaken, the tach wire and signal wire (to the module) are in effect the same terminal, no? IN other words, electrically, the coil only has 2 primary terminals, + the coil hi v. wire.
I feel like I'm shooting myself in the foot here, but I have the best schematics dammit.
Maybe you should charge for tech support for the do it yourselfers like me. I have so many of those parts on my parts vehicles I would be foolish to buy a kit.