New PSC Intro Video -- Check it out

[CudaChick1968]

Those of you who use Photobucket probably already know they discontinued their remixes last December without much warning, and my old shop intro was one of them.

I finally have the new and improved Introduction to Phoenix Specialty Coatings video finished! If you can, please take a couple minutes (okay, four minutes) and let me know what you think of the latest -- and hopefully last -- version. Lots of you will see parts you recognize.

http://s207.photobucket.com/albums/...S/Web Files/?action=view&current=a471b785.pbw

Thanks in advance for your time! :-D

 

[Tony Fields]

Very nice Leanna!


Tony

 

[Cooter]

Nice! Its a little speedy tho. Might want to slow down the detailed pix a little so people have a fair amount of time to examine. JMO.

Wonderful work, tho. I plan on having you do some work on my stuff....as soon as i have something worth doing.

Trav

 

[Badart]

Looks great. Was that Memike's car in there a couple of times?

 

[CudaChick1968]

Thank you guys! I've tried to figure out a way to adjust the speed more than once but there doesn't seem to be a way to do it anymore. Photobucket has made so many changes over the last few months it's tough to keep up. Most are positive changes, but there's a few I could do without. I do like the "Comment" feature though ... some guy already said how delighted he was I was finally able to figure out how to "powder koat a kat." LMAO

 

[CudaChick1968]

Looks great. Was that Memike's car in there a couple of times?

Thanks Bad! Yes ... Victoria has a starring role in her pre- and post-PSC dressage. :-D

 

[mac daddy mopar]

:thumbup::thumbup:

 

[inkjunkie]

looks great to me.......

 

[intergalactica]

Leanna...you're a true artist! You really take immense pride in your job and it shows in the quality of your work. Without a doubt, it's far better than any other work I've seen. :thumleft:

By the way, I have some metal legs that go on a couple of utility sinks that I'd like to have powder coated. Could you match the color so that it resembles the red that's used on Sears Craftsman tool boxes?

Let me now,
Robert

 

[OneOfMany]

Looks great. Quality work for sure.. couldn't help but notice you're NOT 7' tall lol..

Grant

 

[memike]

That is sooooo cool :supz:the way you showed my sweet hart Victoria =P~
and all the very nice work you have dun in the past for us here at fabo and other folks
I put a reply in and I can't wait to show it to Treva :-D
If it is going to fast I just hit the back button and it stayed there for me until I was dun looking at it Cooter :happy10:
Leanna has dun all my part's and the slant 6 engine is my build that leanna did all the coating on, and I have got to thank Billy for all my need's for my Carb that he repaired THANK YOU BILLY :cheers:
Don't take any chance's on any other powder coating co. Cooter :happy10:
They keep you updated and let you know how things are going, She is the best of the best out there :cheers:

 

[DRENO]

Looks great Leanna. A little quick like others have said,but hey,then you can watch it twice.:-D Hope all is going well.8) Take some time for yourself,don't get burned out.

 

[GoFish]

While I live in California and you're on the East Coast, the quality of your work means I'll ship you any powder coating work I need done. Still wish you did ceramic coating...my headers are almost ready.

The intro really shows your beautiful work. I'd also prefer it to be a bit slower. I couldn't read the quotes from your customers and also look at the parts in the 2-4 seconds per slide.

 

[ramenth]

Very nice, Leanna.

 

[CudaChick1968]

Thanks guys! I appreciate your time and the feedback. :-D

 

[63dartman]

Leanna, your work is amazing. I really like the intro. Memike's shot REALLY shows turning a so so engine into a piece of art.:cheers::cheers: Cudos to Memike also:cheers: I'll leave it at that. I had a few more ideas for you but..........It would be an 18 and over site:toothy10::toothy10:

 

[FASTBACK340]

... some guy already said how delighted he was I was finally able to figure out how to "powder koat a kat." LMAO

Why not, you powder coated a ****...er, I mean Rooster. :-D
Did I just type that?


The video looks great. A touch fast... but all in all, you showcased a lot of your work in that time frame. And THAT speaks for itself.

It was good talking to you yesterday. Looking forward to getting more of the `Cuda Coated.

Hey.... Coated Capers. That's either a good thread name, or maybe a **** DVD title. 8)

 

[ocdart]

Looks good, Leanna.
Those SB Mopar Magnum valve covers are gorgeous! Maybe one of these days I'll have a completed car to put them on.

 

[65 Dartman]

Nice work there but a touch too fast. Saw a valve cover there that I really liked what you did with it - think there'll be a change in my Offy valve cover!

 

[Cooter]

Oh and one more thing...please don't lose the picture in your sig-block. I rely on it.

 

[69DARTS]

nice

 

[65BCODA]

Very nice Leanna........I about fell out of my chair when I saw ya quoted me.......Nice to see somethimg out of my mouth is finally worth repeating............big thumbs up chicki....

 

[CudaChick1968]

Thank you Roger!

You ARE worth quoting ... often.

 

[pettybludart]

I got Woody when I got my covers back!LOL


Thanks again Leanna!=P~

 

[CudaChick1968]

Still LMAO @ you and your Woody Scott.

But I'm not pointing though. :-D << duckin >>