post you 1/8 mile combos

-
74 dartsport little 3000lbs at the line
408 Indy max heads from imm engines
12.5 compression
Indy intake e85 Holley 950xp
Solid roller
904 5000 convertor
Dana with a 4.56 and a 28 inch tire
Haven’t ran it yet
 
.030 over 360
stock cast 360 crank
ported Edelbrock heads. 2.08 valves open chamber 340 style head
Ported Victor 340 intake
JE flat top pistons
app 10.8-1 comp
1 7/8 headmen headers
H beam rods
600 lift roller cam
Harlan Sharp 1.5 rockers
750 and 900 alcohol carb. ran the same with both.

3200 pound Duster at the line
727 transmission 5600 stall conv.
8 3/4 rearend with 4.10 gear and caltracs

Its gone 6.54 several times


44503394505_913377a7f3_b.jpg
Untitled by John Cadamore, on Flickr
 
.030 over 360
stock cast 360 crank
ported Edelbrock heads. 2.08 valves open chamber 340 style head
Ported Victor 340 intake
JE flat top pistons
app 10.8-1 comp
1 7/8 headmen headers
H beam rods
600 lift roller cam
Harlan Sharp 1.5 rockers
750 and 900 alcohol carb. ran the same with both.

3200 pound Duster at the line
727 transmission 5600 stall conv.
8 3/4 rearend with 4.10 gear and caltracs

Its gone 6.54 several times


View attachment 1715243068Untitled by John Cadamore, on Flickr
sold my 70 dart but my combo at 3000#
451 13.5 comp 625 comp roller victor intake 1000 Holley HP
ladderbar car 3800 stall converter leaving at 3000 on brake 4.56 gear 29.5 tires
stage 6 heads ported by compu flow
best 1/8 6.39 1.39 60ft 108 mph best 1/4 10.09 133 mph
 
all steel 73 Dodge Dart weighed 3520 with me in it. raced on 93 pump gas
0.030 over 440 with wisco flat top pistons. 10.9 compression
eagle rods
Indy EZ heads with the valve bowls touched up.
comp cams solid roller 0.0264 at 0.050 and 590 lift
crane 1.6 roller rockers
weiand Tunnel ram, 2 Holley 750 DP carbs
727 with 4200 stal 9.5 converter
8-3/4 with 4.30 gears, I blew up the 4.10 I had in the car on the 4th pass. so I installed a set of 4.30 I had laying around.
M/T 275/60/15 ET Drag radials.
my car wasn't really set up for 1/8 mile racing and felt like it would of been faster with another set of 4.10 gears but sold the car before I could find out. with the wrong torque converter and very little tuning. the dart ran 6.70 at 102 in the 1/8 with a 1.48 60 foot. with my friend that weighs a 100 pounds less then me, the car ran 3 10.49 in the 1/4 at almost 127 mph. but I forgot what the 1/8 mile was. man I miss that car.lol
 
Not an a body. 70 Challenger 440 stock steel crank, srp flat tops, ebay h beam rods. Heads are pro comp rpm copies, home ported. Howards 272 at .050 and .662 lift solid cam. 4.30 gears, 29.5x10.5 phoenix slicks and 5000 ptc stall. 1.42 60' 6.49 at 105.8 on 91 pump gas
 
Not an a body. 70 Challenger 440 stock steel crank, srp flat tops, ebay h beam rods. Heads are pro comp rpm copies, home ported. Howards 272 at .050 and .662 lift solid cam. 4.30 gears, 29.5x10.5 phoenix slicks and 5000 ptc stall. 1.42 60' 6.49 at 105.8 on 91 pump gas
Damn that’s a very nice set up you have. What does your car weigh?
 
73 Dart Sport,3300 lbs with driver, 440, .030 speed pros,stock rod and crank, .557 purple shaft, indy Srs,team g, 750 alcohol carb,4500 Lupo, 727,4.56, 31x10.5W. 6.60s @ 103
 
mopar 65. car weights 3455 with me. Figured I was way over cammed, but it worked.
Well it seems to work pretty good to me. I think the Indy EZ heads were a little to big for my 440. I bought them to go on a 511 stroker build I was going to build. Well that feel through, so I decided to use them on the 440. Also at the time I only had a 9.5 inch 4200 stal converter. Again used what I had at the time. But I used of had a 8 inch 5600 one. Which I ended up installing one but never got to try it out before I sold the car.
 
410 stroker, EQ heads (1.92" intakes) mild bowl/guide boss work, Isky 280 Mega hft on a 106LSA, 1.6 rockers, ported Weiand Action+, Street Demon 750, Dougs 1-5/8" headers w/3" exhaust, Turbo Action 10" Tight, 3.73:1 gear, 3590lbs with driver, MP pinion snubber otherwise stock suspension. Best ET 7.70, best MPH 88.9, best 60' 1.68. In an A body, an A100 body:rolleyes:
 
Last edited:
My old 440 6-pk '69 Cuda, 3300lb
stock 6pk bottom end, 9.8:1
260cfm 906's, Team G, 850DP
CC.650/[email protected] SFT cam
4.88's, 14x32, L/bars-c/overs
stock fr susp, 90/10's
2.1/8" f/wells
+150 shot
6.29@108, 1.39 60ft.
 
.030 over 440
Indy ez heads
Harland sharp 1.6
Comp .650 roller
13.5 compression
Indy single plane with 1050 dom.
5500 9" converter
4.56 dana
4 link
Gerst tubular front suspension
3160#
20181104_173116.jpg
 
FB_IMG_1540303032420.jpg
Not a A-body. 64 A100 van, 496 lol deck, Edelbrock heads,637 comp roller,glide,bte 8”, Dana 4.88,32x14,2750#. 6.02@111
 
Last edited:
871FB3E8-0DEB-4F08-86C6-E0B676D5C7C0.jpeg
151254F2-B701-472C-A077-4A6839AB97C5.jpeg
74 dartsport little 3000lbs at the line
408 Indy max heads from imm engines
12.5 compression
Indy intake e85 Holley 950xp
Solid roller
904 5000 convertor
Dana with a 4.56 and a 28 inch tire
Haven’t ran it yet
It ran good
 
73 Dart Sport, 3200 lbs, 70 340, stock crank & rods, heavy TRW forged 10:1 pistons, home ported J heads, MP 557 cam, M1 single plane, 750 HP carb, manual reverse 727, Lupo 5000 stall converter, 4.10’s = 7.49 @ 90.
 
Street/strip 69 Dart, 3350# with me in it, full interior, wipers and heater, glass front bumper and hood, pump gas 434" Indy headed small block, Mopar R1 block, 4.125" Bloomer crank, 6.125" Compstar rods, Diamond 4.090" pistons, 11.2-1, custom Comp solid roller from PRH, 263/271 @ .050", .711/.719 at the retainers, Comp lifters, PAC springs, heads flow in the 330's, ported Indy intake, BLP 4150 carb, Hedman 1 7/8" headers, 727 with a CRT brake, 8" converter that flashes 4900, Strange S-60 with a spool and 4.10 gears, Cal-Tracs and mono leaf springs, Viking double adjustables on all four corners.

It has ran 6.40 at almost 109 mph with a 1.44 60' foot braking on pump 93. It will run deep in the .30's.
 
Last edited:
all steel 73 Dodge Dart weighed 3520 with me in it. raced on 93 pump gas
0.030 over 440 with wisco flat top pistons. 10.9 compression
eagle rods
Indy EZ heads with the valve bowls touched up.
comp cams solid roller 0.0264 at 0.050 and 590 lift
crane 1.6 roller rockers
weiand Tunnel ram, 2 Holley 750 DP carbs
727 with 4200 stal 9.5 converter
8-3/4 with 4.30 gears, I blew up the 4.10 I had in the car on the 4th pass. so I installed a set of 4.30 I had laying around.
M/T 275/60/15 ET Drag radials.
my car wasn't really set up for 1/8 mile racing and felt like it would of been faster with another set of 4.10 gears but sold the car before I could find out. with the wrong torque converter and very little tuning. the dart ran 6.70 at 102 in the 1/8 with a 1.48 60 foot. with my friend that weighs a 100 pounds less then me, the car ran 3 10.49 in the 1/4 at almost 127 mph. but I forgot what the 1/8 mile was. man I miss that car.lol
10.49 1/4 computes to a 6.73 1/8
 
838B9BBC-90EE-4ED7-85D2-738C8A3DBD23.jpeg
1970 Duster
2860 pounds
Powerglide, 4.88 Dana, ladderbar
5760 stall
422 small block 4.100 bore 4” crank
360-1 heads ported indy intake ported
.650 solid lifter cam
App 11.1 comp
850 alcohol carb
1 7/8 inch hedman headers
5.98 in the 1/8. 9.74 in the 1/4
Running out of steam
 
9.7:1 compression 410 w/ box stock chinesium heads and 3.55 gears - 7.87@87 - 7000ft da
 
13.5/1 W8 R3 439 904 4.56 29.5 x 10.5 slick
5.79@117 so far
1.31 with the rears, but have seen some 1.24 60 times “if” the front tires stay and play. Still testing..... in between the damage
 
-
Back
Top