@toolmanmike might know too.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
MomsDuster
Well-Known Member
Good morning folks
Good Morning Torque Flite Friends !!!!
Hey its M&M!
Good morning Early A coffee drinkers
MomsDuster
Well-Known Member
Looks like I’m taking today off. Wrenched my back trying to tie my boots! 
One minute fine next I can’t bend, walk, or even stand too long without pain! Never had back issues before. Not a fan! Worst part is I only have one boot tied. Even when I do get up to move I’m tripping on my laces! 
One minute fine next I can’t bend, walk, or even stand too long without pain! Never had back issues before. Not a fan! Worst part is I only have one boot tied. Even when I do get up to move I’m tripping on my laces!
When you get old Velcro is a friend!
Sucks wrenching your back for sure.
Sucks wrenching your back for sure.
Had one hell of a time removing this distribution valve on this Duster yesterday..3 hours, but saved it and all the lines attached .Looks more and more , like the entire brk hyd system is shot....
MomsDuster
Well-Known Member
Nice job! Not sure I’d have the patience to even try to save it! Rusted brake lines not my specialty!
Morning guys. (and gals)?
MomsDuster
Well-Known Member
Good Morning Mike
zkx14
Duster De-ruster
That was me about a week ago. Had an ice pack on for better part of a day. Got the pain down and I guess things popped back in alignment. Was still sore for a few days.Looks like I’m taking today off. Wrenched my back trying to tie my boots!
After seeing in that MC, I assumed new lines were next...
Good morning
MomsDuster
Well-Known Member
Thanks, @zkx14 Going to try finding a comfortable position and icing it down.
zkx14
Duster De-ruster
I sat up straight in a 'Queen Ann' chair with a pillow rolled to force the ice pack tight to my back
I have the same issue,
A little cranked from cutting metal siding. My arms just arent long enough.
Right leg and right lower back.
My physiotherapist usually fixes it right up.
A little cranked from cutting metal siding. My arms just arent long enough.
Right leg and right lower back.
My physiotherapist usually fixes it right up.
Ben Drinkin
Hey bartender!
You have a physiotherapist? Cool! I have a therapist.. I told her I have suicidal thoughts. Now she makes me pay up front...
And if you can pop some ibuprofen or your favorite adult beverage. In a few hours you might try some light stretching and a hot shower just letting the warm water hit the sore spot.
MomsDuster
Well-Known Member
Well as many of you know the spare tire in some A's never fit in the spare tire wheel well.
Put the board over the spare, pull the mat over the top, and it looks like crap to me.
I ordered a Firestone F560 115-14 and going to get it put on later today.
Its smaller in overall diameter, and 2 1/4" narrower than the current E-70 I have now
For grins I looked up the DOT date on the red line spare I'm replacing....30 years old.
Put the board over the spare, pull the mat over the top, and it looks like crap to me.
I ordered a Firestone F560 115-14 and going to get it put on later today.
Its smaller in overall diameter, and 2 1/4" narrower than the current E-70 I have now
For grins I looked up the DOT date on the red line spare I'm replacing....30 years old.
Well that sucks!!
Yes it does, I notched the 4x6 beams and the uprights, so at least that does not have to be re done. But the new plan will take a lot of soil removal. AKA Digging!! The high side needs to be lowered.. about 6 inches.
Unconventional
Well-Known Member
Good morning. Trying to get motivated for the drive through LA, downtown LA at the request of the rugrats. I'm not sure what they have in mind for them, but they have requested 6 French Dips from Phillipe's. I never shoulda educated my brat about Phillipe's If I plan it right I might miss the noon time rush. Right
If I plan it right I might miss the noon time rush. Right
Last year buddy and i rolled up at his father in law’s. They was building a deck.
It was 6” off level. He says will level it later. We immediately called a cease and desist and went and got our tools. In two days we had a beautiful dead level deck around 2 sides of the house.
Old guy had been at it for two weeks.
Him and his pal are just too stubborn to get a job like that done. They spend more time arguing how to do it than working. It hilarious.
Unconventional
Well-Known Member
You left out the Molson breaks
-
Similar threads
