Search results for query: *

  1. N

    Who has their CCW Permit?

    Stupid california...:bs:
  2. N

    valve float

    What motor do you have? What the spec on the cam? What dist/ign box are you using? On my 340 in my 67 had RPM Performer heads with a Crower solid that was 248/252 and .525/.528 with all MSD stuff and it would sing all the way to 7200-7400 until is just wouldn't pull anymore. I think the...
  3. N

    Engine to Trans Brace Questions

    I didn't have em on my 67 340/727 Dart. I dont know if it contributed but I couldn't keep the TC bolts tight for the life of me.... I also broke 2 TC in that thing. An old timer told cause I didn't have those braces
  4. N

    The Nitrous 340 4-speed 68 Dart

    Grinding out the wheel wells sucked..... I didn't think I was going to be grinding away at it so much so I wasn't wearing a respirator so I stopped when my lips went numb cause there was still a little chem stripper residue.
  5. N

    i wanna learn how to madify a cummins and other diesels

    The ol VP hung in there for another pull... http://www.youtube.com/watch?v=WcBBdhm-Ijk http://www.youtube.com/watch?v=JRJ_WzwOlYk
  6. N

    what max RPM on low comp 273

    How much is gas over there right now?
  7. N

    i wanna learn how to madify a cummins and other diesels

    I bought a 96 12v parts truck for $900 that if I looked into a little more before I tore it apart, it wouldn't of taken much to have it driving and in sellable condition..... But I got the parts to P-pump my truck now:supz:
  8. N

    i wanna learn how to madify a cummins and other diesels

    Keep your eye out for mechanic specials... My buddy got his first 1st gen for $3000. It had a fresh paint job only had 258,000miles and it wouldn't run right.... turns out all it had was clogged fuel filter. So $3015 he had a cummins!
  9. N

    what max RPM on low comp 273

    The guy who had my 67 before me had a 273 in it, it was a stock long block with a HUGH solid cam, single plane manifold, and a 750-800holley and that thing wouldn't make power till about 4000 and then would tap out at about 7800-8000. It didn't last too long though. I'd say free up the exhaust...
  10. N

    camshaft issues.

    Those solid lifter dont look right... My Crower lifters if I remember right looked just like the hyd ones but were solid.
  11. N

    i wanna learn how to madify a cummins and other diesels

    You know Tyler, I just ran over your other post about turbo stuff and it sounds like you diesel instructor is kinda looney...
  12. N

    i wanna learn how to madify a cummins and other diesels

    Megajoltman.... is that a gasser tail pipe?!
  13. N

    i wanna learn how to madify a cummins and other diesels

    Did he do head studs? I have a few friends with twins only one of them have studs and o-rings the rest just have studs and they see anywhere from 55-75lbs. Both blocks have the same number of head bolts.... some just get lucky with HG. I did, I was over spooling my HX-35 and could hit 47lbs...
  14. N

    i wanna learn how to madify a cummins and other diesels

    I love my truck, it does just about anything. Mines got about 220k of abuse.
  15. N

    Megan Fox was in my school!

    Talk nice about my girlfriend!:la:
  16. N

    i wanna learn how to madify a cummins and other diesels

    Also check out some other forums like cumminsforum.com or TDR.com or even Competitiondesiel.com... Although the CompD guys are a little more hardcore.
  17. N

    i wanna learn how to madify a cummins and other diesels

    Demon Speed, what size engines are you talking about? Sounds like the larger medium/heavy duty engines? There are a few different "Gens" for the dodge diesel: The "First Gens" are from 89-93, they were the boxier truck and didn't come with intercoolers till 91. These trucks have a mechanical...
  18. N

    The Nitrous 340 4-speed 68 Dart

    Did a little more work this week.... since I've been laid off and all. As it looks there really isn't any work for about a year or so... Starting cutting for minitubs.
  19. N

    Which do you like best?

    I like the manual cause its a blast to drive, but for getting down to business I prefer the auto.
  20. N

    rear firewall

    So what about the wiring that goes back there? Just use a rubber grommet at the bottom or can there be no rubber in the firewall? Also does the package tray have to be permanent or can you use Zeus fasteners? I'd like to have speaker back there for the cruises and most of the use of the car...
  21. N

    Your Stress Reliever??

    I hear ya.... Or go blast stuff with the AR.... no pics yet
  22. N

    Firefox browser

    I HAVE THE SAME PROB!!! I kept getting "your current browser is out dated and should be updateted for this website" so I did.... ever since your couldn't use a search engine cause it would redirect you to some other crap website. And every time you restarted the comp Windows security would...
  23. N

    Stroker v NOS

    When I started my engine build about 8yr ago there didn't seem to be too much stroker stuff out there for a somewhat budget build. So I went with a stock stroke 340 strong enough for some juice. If I were to start again today I would do a stroker and juice, cause if your buying new stuff...
  24. N

    4 speed automatic

    I want to say the A-500 would bolt up. You could try to find an older dodge truck with a 360 and pull the od trans off that. I know my 47RE trans in my 01 dodge diesel has some parts that is still based off the 727. I know the trans pan is the same.
  25. N

    Whats the best aluminum cylindar heads?

    The free pair...:thumblef:
  26. N

    Undercoating removal

    The undercoat on mine that was soaked in oil from trany/motor leaks made the UC very fluffy and just scrapped right off.... The other 40yr old crap that could take a beating with a hammer and still stay put.... Came right off with some good paint stripper from HD or Lowes. I got the paste stuff...
  27. N

    R3 block

    That good to know.... I hope my machine shop knew that when they did mine.
  28. N

    4 speed action in the dart w/vids

    So what 4spd are you running? I though I saw a thread of you running a Jerico?? Could be wrong, anyway... Whats with the loud "bang" when you grab a gear?
  29. N

    The Nitrous 340 4-speed 68 Dart

    Also got my heads back from being ported and set up for the larger K-900 springs for the solid roller.
  30. N

    The Nitrous 340 4-speed 68 Dart

    Got some more work done. just need to drill front holes and waiting on sliders for the rear. Got the pass side subframe connector done, welding the floor board to the connect was a PITA... The carpet was kinda rotten, I was glad I didn't find holes in the floor board. It just looks like some...
Back
Top