Search results for query: *

Anyone know where to get a template to drill out for 340 scoops for my 72 dart?

Just curious if anyone has used their geometry correcting rocker stands they make for shaft mounted rockers. I'm looking for real world experience with these before I decide to purchase them. Thanks.

Is this to far off? This is showing with roller sweep to the exhaust side. Indy rhs heads with harland sharp rockers. I've read about geometry problems with these heads and I have a feeling this is way off but it's my first time checking for this so just wanted to get opinions.

Harland sharp s70026k shaft mounted 1.6 rockers for sale. These are brand new and in perfect condition, only used for mock-up. Includes 16 adjuster and nuts and billet steel hold downs and hardware. Asking $600 plus shipping.

Used the search feature and finding different answers. I'm running a compcams hydraulic flat tapper lifter xe275hl cam. I converted my lifter to a solid by taking apart and shimming the inside. This is going in a stock stroke 360 for street use and was wondering after I set my adjustable pushrod...

For the guys that have done this mod, what did you do about shock mounting. I know I can mount them in front of the rear end but I'm not sure if that would effect anything as far as handling goes. Just been racking my brain about this and not sure what the best route is.

Finished Moving leaf springs inboard 3 inches and rear end back 1.5 and now we're getting ready to fab up the shock mounts. I already ordered hotchkis fox non adjustables and was Trying to figure out if I should try to keep the shocks close to a factory angle or not. Maybe less of an angle to...

During mockup I noticed the center divider on my rpm air gap intrudes into the bores on my demon carb, is this something I should mess with to make sure flow isn't obstructed?

Just finished moving leaf springs in 3 inches on a 72 dart, also moved the rear end back 1.5 inches using a ford 9 inch rear end. I will be using a fuel cell, this will be a street car and trying to figure out what angle the shocks should be set at and also if I should mount them in front or...

A pair of 72 dart fenders with extensions for sale without chrome trim on extensions. Looking for 300.00 for the pair. Pick up only located in anaheim ca.

In in the middle of mini rubbing and moving leaf springs to the frame rails and I'm sure my stock springs are sagging, hopefully looking to see some pics of darts with stock ride heights and 1 inch under, thinking of going with espo 6 leafs but not sure what height yet, thanks.

Pulled out of my 72 dart and need it gone, figured if anyone was local I would offer it up for free before I junk it, want it gone this week, if anyone is close and wants to make the drive pm me.

Hi guys, Im in the process of converting my 72 dart over to complete 73 front suspension and was wondering if there are any pros or cons to swapping spindles side to side to mount calipers towards the rear of the car, right now I'll be running 15 cop wheels but in the future would like to go to...

Selling a pair of fenders with extensions from a 72 dodge dart in great shape, a minimal amount of surface rust on a few edges from where they were sanded, posting from cell phone and can't upload more pics, pm me with phone number and I can text pics to you, asking $225 each obo. Located in...

wanting to mini tub and move leaf springs inboard, looking to hear from people who have had this done and what people have charged in labor in a 72 dodge dart. Im located in anaheim ca.

73 dart parts car, no front or rear suspension, just the body pretty much, rusty but some solid stuff on it, extra set of doors, 72 front fenders and bumper also, Located in Norco ca, have a skip loader so can load it onto a open trailer, want to get rid of everything in one shot. if anyone...

I've found some info through searches but want to make sure from real world experience that a 4 wheel disc brake setup will work properly with a factory disc/drum mc and proper adjustment of an adjustable prop valve, its on a 72 dart converted to 73 front disc.

Located in Anaheim CA pickup only, No pics, sorry, moving and need stuff gone, aerohead racing la 360 heads less than 200 miles on them, Chinese knockoff airgap intake, black mopar performance valve covers, 318 standard bore block, need machine work, with crank, maincaps, and rods, flexplate for...

Located in Anaheim ca, pick up only, $150.00 each, "http://s1160.photobucket.com/albums/q488/trbodrt/Mobile%20Uploads/"

I have already bought solid adjusting sleeves from American muscle with 11/16 threads, justwondering what tie Tod ends to order from the parts store, will any c body work or is there one that works better with a bodies, going in a 73 dart, thanks.

I will be reinforcing my 73 spool mount k member, for sure boxing in the steering mount, just wanted opinions on reinforcing where the lower control arm mounts, add a washer or just re weld the sleeves, if re welding the sleeves do I need to grind away the existing weld first? I will also be...

I want to add a sway bar tab to my control arms but have no measurements, does anyone have dimensions that I could go off of for a 73+ sway bar, thanks Derek.

Not sure what box to go with, power, manual, or power from firm feel, trying to set up my 72 dart for a good handling street car, I already have a stock reman power box, and a bone stock manual box, would it be worth spending the money that I don't really have on the firm feel unit or should I...

I have a 72 dart originally a slant 6 with corresponding front suspension, I also have a 73 dart donor car original 318 with disc brakes. I will be taking off everything needed to convert to bbp, I would use the k frame but I already have the slant 6 k frame bolted up and powdercoated, I'm just...

I have the new roof skin finally welded up on my 72 dart and getting ready to grind down some of the welds, I have already spot welded the roof to the quarter panel where I drilled out holes previously to de-skin it, my question is should I try to weld the seam solid or will it be fine the way...

I'm converting my 72 dart with kh discs in the front to the later 73 bbp setup, also the rears will be converted to disc brakes with the ford 9 inch setup I have, Will I need to change my proportioning valve to an adjustable or will the stock disc/drum valve work?

I'm trying to set my 72 dart up to handle well on the street and was wondering if relocating the leaf springs to the frame rails would have a negative effect on this. Would it be better to leave them in the stock location and deal with the tire that I can fit in there, honestly the only reason i...

I'm selling my sb 1.6 ratio prw ss rocker arms never been used except for mockup, complete with shafts, hold downs with bolts, adjusters and nuts and shims to set up proper side play, asking $325 plus shipping, located in anaheim ca. pm me if interested

Looking for tubular upper control arms with large ball joint for my 72 dart, I know that i can buy them new but just thought i'd post here first and maybe save some cash. Let me know what you have.

Just received my new harland sharp 1.6 ratio shaft mounted rocker arms for sb direct from harland sharp, these are a new updated product and look as good as there other rockers, I mocked them up on my indy/rhs heads and they sit perfectly centered on the valve stem tip unlike there previous...