Search results for query: *

Hey guys! Hope everyone is doing well; had a quick question regarding current sources of torsion bars. A while back I got a set of the .9" Mopar Performance torsion bars which as far as I can tell, can't find anyone who sells them anymore. I noticed several companies (swayaway, pst, magnumforce)...

So this one has me scratching my head a bit. Had my car on jack-stands for about a week while I got new tires put on my wheels and replaced the rear shoes and drums. Now that shes back on all fours, there's basically no pedal. Putting it to the floor will stop it from rolling in neutral but not...

Holley 600 CFM carb (Part #80457). In really good condition and was functioning properly when pulled off of car. Has electronic choke and vacuum secondaries. $200+shipping Performance upgrade for stock to mildly modified vehicles Universal calibration for easy bolt-on performance Factory preset...

With not being able to work on it consistently, took a bit longer than I would have liked but its finally finished and mounted! Feeds directly into the filter top and can be opened or closed via linkages. Ended up leaving the finish as sandblasted aluminum and then clear coated.

Hello guys, So I calculated my required fuel pump gph from engine demand to be 27.5. How much, if at all, am I taking a chance on hurting myself by still running a 25 gph carter fuel pump? When does this calculation really come into play? Just at long WOT would be my guess. Thanks in advance

Hey guys, motor is a 73 318, valve-train redone with a XE256H, weiand stealth manifold, cope street/strip 904 with a 2500 stall, msd ignition, headers, 7 1/4 with 2.76's. Plan on swapping to any 8 3/4 with 3.91's mid summer. Looking to just go ahead and get a carb that will work for me now and...

Got an interesting one for you guys today, completely stumped the edelbrock carb techs. So put a 1405 eddy on my 318 yesterday and was tuning it and noticed occasionally it would make a sound such as if you were sucking the last little bit of drink using a straw. Happened maybe every minute or...

Making the transition to VR1 in my 318 and need some opinions here. Engine is moderately modified, all top end. Currently with 5w50 gets ~50 psi at start up/25 at idle when hot. Generally a cozy 90-100* outside, engine runs at 180-195 and probably would be driving about 70 miles a week with some...

Hey! Someone gave me these linkages today and was curious if anyone could identify what make and year they go to Thanks in advance!

Hey Guys! So read something the other day that I'd never heard before and wanted to see if anyone here had any insight about it. Essentially it was saying that the greater the difference between the oil's hot and cold weights, the more quickly it would break down and the more likely it was to...

Hey guys, does anybody have a particular grease they like for ball-joints, pit-man arms, etc.? Been using Lucas Oil Red#2 for a bit but was curious what other people like.

Hey guys! Does anybody know of any company or person that fabricates brackets for a 318 to 360 swap? Or some diagrams that I can build my own off of? Also, on a side note just out of interest, what's the most you can safely bore a 318? Heard you risk hitting jackets beyond 4.0 bores

Hey guys! I'm putting a custom hood scoop on my car soon so iv been reading up on tuning the carb for it and here's what I understand at the moment. Should richen it out a bit (like 6%) for the denser air and to make sure that the top of the carb sits at least three inches below the scoop to...

What's going on guys? So for a good while now iv had rear air shocks and front kyb gas-a-justs. Came across my mind that air shocks pumped at 90 psi probably aren't letting the ss's do there thing as well as they could. Any suggestions on shocks for a street car that will go well with ss...

Hey guys! So I'm revisiting a topic I know I read up on about a year ago, and just felt like "hey, haven't hit my head against the wall recently" lol So bought a four hole 1/2" spacer awhile back, liked it but took it off to replace with too much filter. Now I'm figuring to put another spacer on...

Heya guys! Got a list of questions I'm looking for some input on. 1. Iv been looking at buying a Carolina machine engines 360 complete block. Hot rod magazine had good things to say about them but does anyone have any first hand experience? 2. Any opinions about installing an air/oil...

Hey guys! So I know that US Body makes heavy duty and race weight hoods for darts. Does anybody know of any other companies that make them? Iv been looking for a cowl induction

Hey guys! So I'm adding a trans cooler for my 904 and I was curious if anyone knows which is the inlet and outlet on the trans? Or which is which on the radiator. It's a downflow radiator so both connections are on the bottom side by side. I'm guessing the one on the left is the inlet. Thanks!

Hey guys! So I just put on a holley street avenger 570 and haven't really had any luck getting the secondaries to open. The engine idles and and all perfectly and all the vacuum ports have the plugs that came with it or are hooked up and i even put in the lighter spring so I'm kinda baffled...

Guessing this is gonna be a really obvious answer but still figured I'd ask. Swapping out the trans in my car and have three options 1: rebuild (if so, what kit would you use?) 2: TCI Streetfighter 3: Cope 904 pro street (is there no super street 904 like there is for the 727?) Any...

Hey guys, so I just installed a transgo TF-2 shift kit and followed the directions exactly (except I didn't grind down the tv valve like everyone recommends). It shifts great except every so often on the 2-3 shift it does this little high rev for like half a second and then engages 3rd. And it...

Hey guys, so today I was talking with my boss (work at a custom hot rod and performance shop) and he was saying I could make more power by switching to a holley 570 cfm street avenger (I have a edelbrock 600 cfm 1406 carb). Questions are: What do you guys think of holleys? Do they lose their...

Hey guys! Was just curious what gear oil you'd recommend for my 7.25? Manual says SAE 80 or 90. Temperature has never been below -10, usually around 10-15 degrees in the winter.

Hey guys, just wanted to hear which you all prefer to get the most out of your engines in the summer. Not having over heating issues at all, car sits at 190 will cruising and 205-210 at a light, just wanted to know if I could get a bit more power running a bit cooler.

Hey guys! So got some luck today and broke down in front of my house rather than on the four hour drive I had yesterday lol. Anyways, pulling up to my house my car just died. Had to put the pedal to the floor and crank it for about 30 sec just for it to get enough air to start. Once started it...

Hey guys! Happy Easter! Anyways, so at idle, I am getting slight amounts of white smoke coming out the exhaust and if you go WOT it flows out a small cloud at around 3500-4000 rpm. I know my car runs a little rich and that black smoke is running way to rich. It is even amounts out of each pipe...

Hey guys! So I'm finally looking to replace my completely exhausted suspension. Iv been looking at mopar performance superstock leaf springs and torsion bar set and have two questions. Should I be getting 2800 lb leaf springs or 3200 lb leaf springs and does anybody know off the top of their...

Hey guys! Haven't been on in a bit but hope this thread finds you'll are doing well! Anyways, got a TF-2 coming my way and was curious if anyone had any suggested and trusted modifications. The big one seems to be don't grind down the tv valve, wanted to know if there are any other popular ones...

First off, Happy New Year to all you guys!!! I found a chrysler 8.25 rear end and I was curious if anyone had any experience with doing the swap or know what I need to alter or prep to put in the 8.25?

Hey guys, I'm locking my heat riser open to keep it from rattling but am having trouble figuring out which way is open. Both cold and with the engine warm, I spun it all the way clockwise (if you were looking at a clock in front of the car) and all the way counterclockwise and it seems to flow...