Search results for query: *

I have a slightly used Digital Dakota Pac 2750 Fan Controller for sale. Works perfectly. The reason for selling is that I bought the Holley Sniper fuel injection which has fan control built in. With this unit you can run 2 fans, set on and off temps and run fans after car turns off also turns on...

My 72 Duster has been a 7 year project from start to now. I just recently completed the turbo installation and figured I would share some of the build to possibly help others. The motor is a LA 360, .030 over cast piston, stock cast crank. Heads are cast iron 2.02 intake valves, mildly ported...

I'm looking for a set of Small block mopar block hugger headers. Preferably coated or stainless steel. New or used in good condition. Thanks, Dave

Hey guys, I'm looking for the drip rail molding for a 72 Duster. I mostly need the drivers side. Mine is kinda beat up. If you have a whole set that's fine. Thanks, Dave

Hey guys, I'm putting my windshield back in on my 72 Duster. There are 4 trim clips in the picture that are different than the others. Anyone know where they are supposed to go? And why they're different? Thanks, Dave

Hey guys, getting ready to add a trans cooler. Which one of the cooler lines is the output side and which is the return? The line at the front of the trans or the rear? Thanks Dave

Hey guys I'm getting my car ready for paint and I'm checking gaps and I noticed the bottom trim on the back glass just in front of the decklid has a large very large gap. I didn't pay attention during disassembly. Does anyone have a picture of theirs installed? Thanks, Dave

Does anyone know if you can use the 73 Duster brake booster in place of the 72 unit on the Duster. The pics look the same online but the application says it's different. The 72 seems to be harder to find. Thanks guys.

I have a brand new rear seat upholstery for 72 Duster and Demon. It is from Classic Industries and made by Legendary Interiors. It is Black, part number is shown in picture. MA 723100. Asking $220 with free shipping to the lower 48 states. Thanks guys. Dave

Hey guys, I'm rebuilding my small block 727 and after disassembling it I found the front drum is only a 3 disc setup. I would like to upgrade to 4 or 5 clutches. I know you can get drums that are modified for 4 and 5 clutch drums. My question is are there any other pieces needs to do this mod...

Hey guys I'm looking for an undamaged passanger side C- pillar interior trim panel. I'm not sure if that's the right name for it so I've attached a photo. Thanks, Dave

Hey guys, I'm assembling my 73 360 engine and during the crank install I noticed the rear main cap has a slot cut in it . It's about 1/8 inch wide and 1/8th deep that runs from the inside edge of the cap to the outside edge. Is something supposed to be in there? When I took it apart it looked...

Hey guys I'm looking for a Badger cast 030 over piston for a 360. The casting inside the piston should be B 290. I really only need 1 because mine has a cracked ring land. It doesn't have to be new as long as it has no damage. I know it's a long shot but thanks for looking.

Hey everyone , I'm looking for the engine specs for allowable cylinder taper and out of round so I can tell if boring is necessary or if I can just hone the cylinders . Thanks , Dave

Hey guys, I was wondering if the posi units for the 8 3/4 are interchangeable between the 3 different housings or does each one have it's own. Thanks . P.S. obviosly I didn't mean posistion swap. Damn auto correct.

I obviously know that the design of the 2 are different but will the 71 panels fit the 72? Looking at them in the catalogs all the holes appear the same. I like the 71 design better. Thanks for the help.

Awhile back I converted my 72 duster 4 wheel drum brakes to front disc. I used a master cylinder from a 73 disc brake car and put in an adjustable proportioning valve for the rear. I don't have the original proportioning valve. The problem is that the rear wheel cylinders are new and have...

Hey guys, I want to try to use the Magnum manifolds for a turbo setup. The question I have is are the maifolds cast iron or steel. I see that the chevy LS guys are able to weld theirs and say they are cast steel not iron. Anyone know about the magnums? Thanks

Have any of you guys used the AMD tailpanel for the 72 Duster? The reason I ask is that I have gotten 2 of them and they are both the same. The opening for the tail lights are crooked. I have attached some pictures and as you can see the straight edge is laid on the top edge of the openings and...

Not sure if this is the right forum for this question but I'm trying to find out if anyone has seen or done a serpentine pulley swap for the LA motor. Any suggestions would be great. Thanks guys.

Hi guys, I have a 72 Duster with the original grille. I was looking at a brand new Sharktooth grille and it states that it comes with upper and lower trim. Is there a trim piece for the headlight bezels? Thanks

Hey guys, I've got a 72 Duster with the bucket seats and the panels on the back of the seats are a little roughed up. What have you guys used to recreate that textured finish? Thanks, Dave

Hey guys, I've seen several dashes similar to this one. Anyone know where to buy them? Thanks

Hey guys, I need some help. I just received my new rear quarter panel from amd. This may sound like a stupid question but on the bottom of the panel right in front of the tire opening there is a body line or a defect in the quarter panel. My originals don't have this line but they have had...

Hey guys, I was wondering if anyone here has tried one of the Duster Scoops listed on Ebay. http://m.ebay.com/itm/252006366728 if so how was fit and quality and what did you do for mounting hardware? Thanks.

Hey guys, anyone know the measurements for the location of the R/T style scoop on a 72 Duster hood. Thanks, Dave

Hey guys, I've got a 72 Duster and I'm looking for an aftermarket a/c system. What are you guys using and were there any problems... fit, performance etc. Thanks, Dave

Hey guys, trying to find out if anyone is using RTV instead of the gasket on the tranny pan. It seems like the gaskets always want to seep a little and I can't stand leaks. It also seems like alot of manufacturers are using RTV. If so, what type of RTV are you using? Thanks guys.

Hey guys, I need help with my pulleys. I have a 73 360 that I got from a 76 pickup I bought. The problem is that the water pump pulley is about 1/4 inch to far out. The crank and p/s and alt pulleys all appear to line up, could there be a difference in water pump lengths from a/c to non a/c...

Hey Guys, anyone used Radiator Express, if so how was quality and service? Did you get stock replacement or aluminum? Thanks, Dave