Search results for query: *

looking for a super vic holley strip dominator M1 for small block la heads

I need the front marker lights in front fenders for 71 scamp Prefer canada to save on shipping but open to ideas?

nvm

Hi Guys Need some help, I want to find the nss plug . I do not see it on firewall so I assume its under dash somewhere? Can any one tell me what to look for? 1971 plymouth scamp Thanks

I am tossed as to whether I need to buy a leaf relocation kit. With the right backspace I am sure I can get a 235/60/15 drag radial in my car and with a leaf relocation kit a 255/60/15 drag radial. I do not think a 71 scamp wheel well will handle a 275/60/15 tire. I have ss leafs and will be...

I am planning on mt et drag radials, is there a comparable tire for less money I am quoted 250 a tire up here

I have 15" weld wheels. I am going to buy mt et drag radials. I want to be at 6200 rpm at the end of the 1/4 mile. Is there any way of picking the tires and rear gear ratio that will achieve this.I would rather buy just once. I am also running a std 727 with new sprag etc if this makes a...

Hi Guys, I need a mechanic who knows dodge's as I feel I am in over my head on the current project. If you guys know a good one here in the lowermainland I would appreciate it Don

Hi Guys I have a brand new set of flowtech headers for sale ceramic coated. Never used paid 350 for em would like 150 fit 1971 abody with manual steering I believe up to 1976 I am in surrey bc canada

This Sunday is the annual Mopar show in Langley

I have an idea and wonder if any of you have seen this done or have a picture? I am thinking of taking my rally rims sandblasting them widening the rears and then powdercoating them black and adding the trim ring and the 71 center.And now that I am in the right section thank you if I relocate my...

I was at the engine builders yesterday and we were discussing roller rockers for my engine.He likes Scorpion, he has had good luck with them in his personal motor and other builds. So i went and bought a set, the price scared me as they were really cheap in canuck dollars so I went home and went...

I would like some advice boys and girls please. engine: 408 xe268h 9.7 comp all forged r/t heads 2.02 904 w/2400 stall ss springs - 002/003 Now what do I do to suspension and tires to get this all to hook. Car will be going to local shop for weld in frame connectors as soon as motor is ready. I...

I have to make a decision quick, and I am told to run flat tops with r/t heads. if I run 10.5 comp I will make better use of the quench vrs semi dished and 9.8 comp which may hurt my ability to run pump gas. Need all the help I can get as I have to make a decision quick.:banghead:

1st though what octane fuel will I have to run? Almost there here is the list 77 360 stock crank,stock rods pistons are going to be speed pro forged with slight dish which with my heads will give me 9.8 vrs flat top 10.5:1 just waiting for machinist to open block to see what overbore pistons I...

prefer in canada because of shipping. looking for weld centerline etc prefer 15" and able to fit my 71 scamp wheel wells which are the same as a dart i have been told. I also have for trade a brand new whiplash cam,lifters and springs cost me 600 landed I am switching to an xe268h tomorrow when...

I was told at work that Tom the tire guy is having a car show this sunday in surrey

need all of it please and thx these are the side markers that I am looking for and is there any other years that will work? Don

I need the buckets and the lens for both front fenders of my 71 scamp. I think duster is the same not sure what those side markers are called. Pls and thx

I have found that finances dictate a constant changing of the mind and direction anyone else? 5 years ago I bought a 71 Scamp that needed complete restoration.I saved for 3 years for the paint job, spent 6300 only to get a horrible job.I went through last year bummed and not able to look at the...

I just bought a used roadrunner 8 3/4 rearend all I want is the gears. I see 742 casing and I am told it is a 4:10 posi. The old way was to turn the tire and count the revolutions of the drive shaft. There are no tires and the brake drums feel like the brakes are up tight. any ideas would be...

Hi Guys, I am open to suggestions Budget=3500 1977 std bore long block 360 ran good when pulled. Machining up here will eat up 1500-1600 of my budget I already have chinese version of airgap used, 650 thunder series carb used, brand new xe268h cam and lifters, but my brother will buy them...

I need an engine machinist for a street friendly performance build who is reasonable on prices and quality machining. I am located in Surrey but I am willing to look at the whole lower mainland. It is a 360 that I am rebuilding. Thx Guys Don

I had the scamp painted aprox 7 months ago, it sat in my carport for 4 1/2 months and looked perfect. we pushed it outside to build a new fence. 2 1/2 months later we pushed it back in and there is a textured feeling to the hood,roof and trunk. nothing is taking it off, if i clay bar the same...

I hope to find some good deals tomorrow at the Tradex. Brother is coming along and we both want A body buckets if there is a set lol.

I have an opportunity to buy to 360 manifolds. I cannot find anywhere to validate that they are 360 and that they will fit in an a/body. these are the casting numbers if anyone can help. The casting numbers are 4173186 and 4173158 They are well priced but I do not want to waste money. Thanks

I also need all the side markers for a 71 scamp prefer really good condition Mint scamp and plymouth emblems. would be interested in mint rear tailights If your close a set of mint bumpers. I am also wanting the plymouth duster dual snorkel scoop Prefer Canada due to shipping but if the pieces...

prefer if you were in Canada, saves on shipping. I need a set of factory 360 manifolds to fit in a 71 scamp 340 are too expensive for 1 hp Thanks

Do you guys know where I can get new door locks locally? Also do any of you know a mechanic who could help me, I want to pull my motor and have never done it so I will pay for someone to help and oversee for my paint job is very fresh and I do not want to damage it?

Hi guys Am I the only one that couldn't log on today?