Guys, Gals this has been buggin' me....

[RustyRatRod]

Just to let everyone know, the intake manifold that has been donated was given by member greymouser7. He is a good friend of mine from SE Georgia. I actually had that intake here to clean up and sell with several things he left here for us to split the profit on. Also, plans on carburetion have changed. I have a very nice heavily modified 3310 750 Holley that I am throwing in as well since two Edelbrocks fell through. Even modified, that carburetor will not be enough for my 451. I'm thinkin either an old 950 or 1050 Holley vacuum secondary three barrel, or a 930 Predator carburetor with an idle circuit. I would rather have the three barrel. They are odball and not many people can tune them well.....but I can.

 

[greenhornet]

Good update guys, maybe this update won't fall into the cyber blackhole like most of the others... See DarTT, I told ya not to sweat the carb, Brother Rob stepped up and took care of it...

 

[PanGasket]

Good update guys, maybe this update won't fall into the cyber blackhole like most of the others... See DarTT, I told ya not to sweat the carb, Brother Rob stepped up and took care of it...

Yep! :cheers:. Im truly thankful to Rob and greymouser7!! Im going down to Macon this friday and will post some pics to my restoration thread.

 

[Coyote Jack]

I have a complete 318/904 setup just sitting here. If you need any small parts off of it they are yours. I also have a manual reverse valve body (with low band apply) in a 727 that I distroyed last summer if that is any good to you. Just let me know.

Jack

 

[PanGasket]

That would be really cool Coyote Jack!! Thank you!

 

[6pk2goDemon]

Mike, I mailed your armrest and base yesterday to Bruce's addy. Hopefully, it will arrive by the weekend for you! :cheers:

 

[PanGasket]

Mike, I mailed your armrest and base yesterday to Bruce's addy. Hopefully, it will arrive by the weekend for you! :cheers:

Thank you soo much Cheryl!!:cheers::cheers: I don't know where mine went to as the PO replaced it with butterscotch armrests and bases for a B-body, lol

 

[oldcarnut]

header pics , these are what ive got ,they have not been used but have light surface rust in spots , let me know if youd like them & ill ship them , it may be 3-4 weeks though as bills are due ,john

 

[Dusterdude72]

From one young gun to another,congrats again DarTT ....put it all to good use and let everything everyone has done for you stay with you always. And don't let any of the people who may have anything negative to say get you down. Just have fun with it!!!:cheers:

I like the fact so many are not only offering up some fish dinner but that you are learning to fish aswell. The more you fish the more stuff gets stored in that old tackle box .

 

[RustyRatRod]

header pics , these are what ive got ,they have not been used but have light surface rust in spots , let me know if youd like them & ill ship them , it may be 3-4 weeks though as bills are due ,john

Yes, we would love the headers. They will be a tremendous help. You can ship them to my address. It's the "Rob Merritt" address on page 9. Thank you most gracuously.

 

[oldcarnut]

i think ive got a set of 3/8 rod bolts (new) & some new cam bearings also if you want ill send them with the headers too , let me know , john

 

[RustyRatRod]

i think ive got a set of 3/8 rod bolts (new) & some new cam bearings also if you want ill send them with the headers too , let me know , john

That would be great. Let me know if you need somethin. I have a few things. I am trying to rebuild my Mopar inventory. I sold everything off about 13 years ago like a moron.

 

[/6 Matt]

Being in the same position as DarTT (age wise, $ wise and car wise) I find it to be a novell Idea to assist a young gun. I must say though, DarTT probably needs help more than I do because as far from perfect as my Dart is, it still drives.

 

[/6 Matt]

A classic mopar will evaporate $ like Water Over a Fire...and you havent even gotten started yet.

This statement holds more truth than any I've seen on here all month! I've always said when I aquired the Dart, I dug a deep money pit for myself. Someday I might have a girlfriend, aka money pit #2. Hopefully my money pits will play nice.:-D

 

[PanGasket]

header pics , these are what ive got ,they have not been used but have light surface rust in spots , let me know if youd like them & ill ship them , it may be 3-4 weeks though as bills are due ,john

i think ive got a set of 3/8 rod bolts (new) & some new cam bearings also if you want ill send them with the headers too , let me know , john

Thanks oldcarnut!! No rush necessary. I really appreciate that!8)

From one young gun to another,congrats again DarTT ....put it all to good use and let everything everyone has done for you stay with you always. And don't let any of the people who may have anything negative to say get you down. Just have fun with it!!!:cheers:

I always will just have fun with it, its my car, I like it how I like it. And I definately will put everything I recieve to good use!:-D

 

[needsaresto]

header pics , these are what ive got ,they have not been used but have light surface rust in spots , let me know if youd like them & ill ship them , it may be 3-4 weeks though as bills are due ,john

Nice! Better than the ones I offered for sure. Thats OK I'll use em for a headers 101 repair thread,lol!

 

[oldcarnut]

ill have those rod bolts & cambearings headed your way probably this weekend , later on the headers , funds are low...

 

[PanGasket]

ill have those rod bolts & cambearings headed your way probably this weekend , later on the headers , funds are low...

Thanks alot oldcarnut! No rush.8)

 

[340plot]

hey guys, i am late to see this thread, but i will look around tommorow, and see what i got,,,,,,,,,,,,,,,,,,,,,,,,,oh, i got a brand new mechanical fuel pump still in the box, ... need one? if so , pm me a address to send to

 

[PanGasket]

hey guys, i am late to see this thread, but i will look around tommorow, and see what i got,,,,,,,,,,,,,,,,,,,,,,,,,oh, i got a brand new mechanical fuel pump still in the box, ... need one? if so , pm me a address to send to

Another member, pettybludart was nice enough to send me one already, thank you though. :cheers:. I still need a few other things though but its no biggie

 

[340plot]

well, i will get back to you, with something else my friend

 

[PanGasket]

well, i will get back to you, with something else my friend

Thank you very much! I will take any help I can get

 

[A68DART360]

Hey Mike I will be sending you a set of V8 torsion bars and a extra set of motor mount biscuits to Roberts address. Eddie

 

[RustyRatRod]

Thanks Eddie. Mike is havin kinda an emergency with his father. Somethin about his dad's heart. So I will tell you thanks for him. thanks.

....and please.....call me Rob. The Robert thing was just bein formal for my mailin address. lol

 

[Wylde1]

All I can offer is a 3-3/4" AutoMeter Autogage tachometer. It's been sitting on my shelf forever but it did work when I removed it from my old Volare Roadrunner many years ago. It's not a sexy 5" monster tach but it'll keep track of the rev's. I'll attach a picture from AutoMeter's website.

Shipping from Canada on this small item should not be too much $$$ for me to handle.

Wylde1.