Is this a yes to both? I only have a cut off wheel and a torch, but Idk how to use the torch lol
TKX vs T56
- Thread starter DentalDart
- Start date
-
Is this a yes to both? I only have a cut off wheel and a torch, but Idk how to use the torch lol
TT5.9mag
Two atmospheres are better than one
It is. I was trying to be a little cheeky with my answer. “Yes and yes”. The torch (if oxy/acetylene) I would not use. It’s probably overkill for sheetmetal. Plasma yes though. And a cutoff wheel on a grinder is a definite yes.
Angle grinder with a cut off wheel. Or a sawzall depending on the cut.
Plasma cutter would be slick but I don’t have one.
Oxy/acetylene torch is a tad aggressive for this stuff
1WildRT
Well-Known Member
Everyone does fabrication differently, use what tools materials & skills you have...
End of the day whether you choose a five speed or a six speed you're gonna love it... The fun it brings to driving is a game changer...
In years past both my Challengers were automatics...I swapped out driving duties practically ever time I when for a drive... About a year ago I swapped a five speed into the red one.... Sorry to say, the green one is feeling pretty neglected
End of the day whether you choose a five speed or a six speed you're gonna love it... The fun it brings to driving is a game changer...
In years past both my Challengers were automatics...I swapped out driving duties practically ever time I when for a drive... About a year ago I swapped a five speed into the red one.... Sorry to say, the green one is feeling pretty neglected
Well plasma cutters are cheap, so I’ll get one. I already have the crossmember so it’s can play with the parts car.
Did you do the tkx then?
Dartsun
Mopar Dude
I bought the T56 for my 69 dart still sitting in its box before the TKX was available. No regrets I've always wanted a 6 speed old muscle car.
-
Similar threads
