Search results for query: *

Hi Guy's, It's been awhile since I've been able to get the old bus out. Anyway last week I did manage to & I seem to have a stutter it's hard to explain but I'll try. I do my burnout no worries stage & hit it out the hole sweet then I get a feeling like it's starving for fuel then less...

Hi Guy's, Ok I am looking at buying another MoPar which is located in Colorado I have to have it shipped to Orange county for export. I need the name & contact details of some tried & trusted transport companies to get a few quotes from. Cheers Oz

Hi Guy's, I need to rebuild the front end of our 65 Barracuda & being in Oz parts down here are hard to find. I need to know if the idler arm on a manual steering car & power steering car are the same ??? Summit have a idler arm MOG-K414 but it doesn't say if it fits power or non power...

Hi Guy's, I have a early 273 I am about to rebuild & have been told that they have a different angle in the valley & I can't fit a aftermarket intake. If they are different can a intake be machined to fit ??? Or can I fit later 273 heads & then fit a aftermarket intake. Or are they...

Hi Guy's, I need some help finding a set of huggers. From my research I found that there are 2 designs the normal 4 into 1 collector square style & what they call a hand style where the pipes are side by side these are for tight fitting engine compartments which is my problem. Does anybody...

HI Guy's, ok just about to fit a new fuel system with an electric pump I have been told I need to fit a safety shut off switch in case of a accident. I have been able to find 2 different kinds & was wondering what 1 to use The first 1 is a oil pressure switch which cuts the fuel when...

Hi Guy's, I need a little advice on a new fuel pump. I am running a 110 GPH Holley mechanical pump now & since we have installed a stroker crank & new cam the pump is not keeping up in the top end. I have seen advertised a Edlebrock 170 GPH mechanical pump or would I be better off...

Hi Guy's Anybody used 1 of these fuel pumps I'm thinking of giving 1 a try. I'm just interested in hearing any good or bad reports before I buy. http://www.racepumps.com/index.html Cheers Gra

Hi Guy's, Ok my mechanical pump is no longer up to the task I have a 360 stroker with 850 DP auto 3:9 rear I have run a best ET of 11.2 @ 117.3 MPH Last time out it ran shocking as it staved for fuel at high RPM. So now I am looking to find a electric pump. I want to find 1 that will...

Hi Guy's, Well we got the long roof to the track yesterday & it was a mixed bag First of we started the morning getting the new 850 HP tuned then around the corner to the strip we went. First thing it stalled after the burnout then it bogged down of the line I only had it stalled to...

Hi Guy's, Do LA motors use the same water pump as a magnum motor ??? Or are they different Cheers Oz P.S. we are running the long roof tomorrow will have resaults soon

Hi Guy's, Ok went out for the 2nd time last nite. we are running pretty consistant 1.6sec 60ft times & going well till we get to about 5500 RPM in top gear then it feels a little breathless. We are crossing the line at 6400 RPM doing consistant 11.4's at 116+ MPH Motor is 360 stroker +...

Hi Guy's, Ok I have done a few miles with my new motor & my engine builder told me to check & adjust the rockers / valve clearance......(He set them at .019 inlet & Exhaust when he assembled the motor)...... I have a comp cam # 20-633-5. The cam card says the clearance should be .020...

Hi Guy's, Ok it's been 18 months but we finally got the Long Roof Racer back on track on the weekend. To our delight we ran a best of 11.353 @117.5 mph...60"ed in 1.592 we are stoked with the new set up which hasn't even been tuned yet. Big smiles down here in the land of Oz. Stay tuned...

Hi Guy's, I have a question after talking to my engine builder the other day he told me that if I change my intake manifold fromthe RPM air gap to a Victor Jr I would gain 30hp. Any thoughts or ideas ??? Thanks Oz

Hi Guy's, I just picked up a set of Eddy heads for a good price. It says I must use roller rockers on them. So what roller rockers do you recommend for Eddy heads??? I have a set of yelow terra rockers on my other motor with work J heads but have been told they are no longer...

Hi Guy's, Ok got my 360 stroker motor in finally.......Now I have a few questions at the moment I am running a HV carter mechanical fuel pump I don't know if the pump will be sufficiant to use with the stroker ??? Cheers Oz

Hi Guy's, I am on the search for a rearend for my old wagon 8 3/4 rears are rare over here in Oz so looks like I will have to go with a ford 9 inch. or I have found Ford also have a 8 3/4 diff does anybody know if the Mopar centre will fit the Ford housing ??? Cheers Gra

Hi Guy's, Ok I need so help advice on what cams you guy's are using with your stroker motors. I have a 360 + "060" with 4 inch stroker so it's 416 ci. The heads are J heads big valves, ported & polished inlet flows 256, ex flows 185 I run a 727 but am getting a new 1 built for the...

Hi Guy's, Well got my stroker kit from CNC great guys to deal with reasonable prices & shipping very helpful. So now I will be pulling the engine in the next few weeks I have to drop it at the engine shop to get machined to fit the stroker crank. I am running the flat top pistons hopeing...

Hi Guy's, Anybody had any dealings with CNC Motorsport ??? I think I'm about to purchase a Scat stroker crank, a set of Probe forged pistons & Scat forged H beam rods from them. If you have do any business with them good or bad I'd like to hear about it as I am along way away. Cheers Oz

Hi Guy's, I'm not sure this is the right section to ask this question if the mods want to move it to a more approprieate section that is cool. Anyway I want to get a 408 stroker kit for my 360 & was woundering if anybody could put up some websites of were to get a stroker kit from. Any...

Hi All, Has anybody ever stroked a 273 using a 360 crank??? I know it has been done to 318's. I am about to build another 360 with a stroker crank & though I have to also rebuild the old 273 for my old 39 Dodge hotrod....I have a spare 360 crack so can it go in the 273 I say to myself...

Hi Guy's, Thinking of fitting an electric water pump. Just wondering how do you know how much water flow is needed ??? What does a standard belt drive water pump flow ??? What brand electric water pumps are being used ??? Thanks Gra

Hi Guy's, The weather down here hasn't been great so far this spring but got 3 runs in on Sunday. The old wagon is now running high 12's consistantly now. best time was 12.814 @ 105.09 MPH. Also but the wagon on a weigh bridge & she weighs in at 1445Kg or a tad over 3200lbs without the...

Hi Guys, I am looking for a new wiper switch for our 65 Barracuda it has the variable speed wiper switch. I can find 64 & 66 switches & they look the same as mine. Do the 64 & 66 swithes interchange with the 65 ??? Thanks for any help Oz

Hi Guy's I am after some infomation. I have a 360/727 combo & have been told that a 904 will lower my ET at the strip. What do I have to do to fit a 904 to my 360 ??? My main concern is the external balance crank & the stall converter. Please enlighten me. Thanks Gra

Hi All, Picked up a few old 318's yesterday 2 just the run of the mill 318's & 1 that was different. I can't find any info on it can somebody help me work it out numbers are as follows Engine # A630L00813 Casting # 08 04 78 29870?0 the missing number is either a 8 or 9 just can't make...

Hi Guy's Ok my question is simple I am running a 750cfm vac sec Holley on Eddie Performer inlet I have had teh heads ported & polished got the right cam & everything runs fine best time of 12.91 @ 103.98 mph. My question is poeple at the strip keep telling me I should put a double pumper on &...

Hi Guy's, I need some input on what set up I should be looking at running. At the moment this is what I have. 360 + "40" V8 hyper flat top pistons Comp cam 227-4 hyd .525 lift J heads ported polished 2.02 inlet 1.65 Ex double springs Roller rockers 1.5 ratio Edelbrock Performer duel...