Search results for query: *

HELP! Does anyone know of a shop that can take on and finish my 25.2 Chassis? This is a 68 Plymouth Valiant. I have all the parts to make it a roller to include the tubing and the strut fixture. I need the front strut bars, steering etc, the double frame rail upper bars done to the firewall as...

Brand New AVIAID Dry Sump Mopar Big Block Oil Pan. 4-12an fittings and has a baffle tray to keep the oil where it needs to be. $450.00 Buyer pays shipping.

This is an original never used **DISCONTINUED, Rocky Mountain Dash**. 1967-1976 Dodge Dart I had this dash built a long time ago. It has never ever been installed and has been sitting on my parts shelf for years. 9 openings for 9 Gauges. This dash is set up for the following. 1) 2 Holes - 5"...

Mopar A904/727 Precision Performance Products Shifter. Used for only a few months. Everything minus a shifter cable. I had this behind an A904. It is reverse manual pattern that you pull to shift. Like New. Located in Temecula California. $300.00 Buyer pays shipping. PM If interested. Thanks...

A904 Ultimate Converter. I used this behind my 408 CI Mopar. The picture in my avatar is with this converter. It will stall to 4800. Anti balloon etc. I had this custom made and it cost me $1200.00. This converter took my car to a consistent 1.46 60" on the trans brake with a 4.30 rear gear and...

$2000.00 for all. Fits SMALL BLOCK MOPAR Edelbrock Aluminum Heads done by Brian at IMM Engines, set up for Solid Roller Cam. 65.5CC Chambers. The intake is port matched. Intake valves are 2.02 Exhaust is 1.60. They flow around 300CFM. The rods are standard H Beams 6.123 big Journal. Buyer...

I got a new project in the works. This is a 68 Valiant Signet Post Car. It is pretty much all there minus a couple pieces of trim. This car will be back halved New K Frame, I am keeping the torsion bars This will be a 3/4 chassis car on the same level as the Street Outlaw Cars. YES we want to...

I purchased this 68 Valiant to build as an Outlaw car. It will be registered on the street but it will mostly be used for racing. Everything is for sale. We are cutting the floor out in a few days. The seats "Front Buckets" Rear bench seat, steering column. Any part of the original floor pan...

Well... I am out of the game. The car does not get used much so it's time for someone else to enjoy it. You can drive this car anywhere even with the 4.30 gears & spool. I have done it! It is super healthy and reliable. This is a true street cruiser and has the power to please no doubt. I have...

I am going to start a new engine build. This will be about a 9 month or so project so bare with me.. haha The block is in stock and should arrive in California in the next few weeks where the fun will begin. Cubic inch I have not decided yet but 482 CI SBM sounds good to me! Go big or go...

I have searched everywhere... Does someone have a Transbrake-Nitrous-full throttle switch with a purge & bang button wiring diagram? Mine is already wired but I am adding the Full Throttle Switch and turning my NOS button on the steering wheel into a bang button to purge NOS through the...

I have searched everywhere... Does someone have a Transbrake-Nitrous-full throttle switch with a purge & bang button wiring diagram? Mine is already wired but I am adding the Full Throttle Switch and turning my NOS button on the steering wheel into a bang button to purge NOS through the...

I have an 8 3/4 Rear end, 3.91 Gears, Spool, 742 Case, Drum Brakes, Caltrac Mono Leafs that sit 1.5" lower that stock, Front section is 1/2" Longer at 21.5" for bigger tires. Caltrac bars & Rancho 9000 Shocks. Driveshaft to go with it is 4" with 7260 Spicer U Joints New trans yoke installed as...

http://motormaniatv.com/?page_id=529

So does anyone know the deal with the difference in how fast you can go with each helmet? I am trying to compare Full Face Helmets. I know that M is for Motorcycle and SA is for Auto's Lots of guys run with the M and from what I am reading it is good for anything 13.99 & Under if it is...

A lot of you here know the car and the project. I am off the TT Kick as of now. Everything I have for it will go with it, except what is listed below. It is minus a motor/trans and is at the paint stage. 9" Ford with Triangulated 4 link, Coil over conversion in the front. 14pt cage etc, all...

Ok, I went to shut my hood a few weeks ago and the hood hinge spring popped off on the passenger side. I have took the inspection cover off under the wheel well and I can see and touch the spring. Can someone tell me how the heck to get it back on? Last resort I will pull the fender but I would...

http://motormaniatv.com/?page_id=529

http://motormaniatv.com/?page_id=529

Guy thought he was on his Motorcycle! Pump Gas Style..... http://youtu.be/jNsNa5v6nOk

I am going to be pulling the bench seat and installing some Racing/Sport Seats. I am trying to match my interior color I have now. It seems to have 2 Colors. The outside is green and the inserts have some flake. Where can I find this paint for either Vinyl or Simulated Leather? Next...

IRISH SAUSAGES Seamus and Murphy fancied a pint or two but didn't have a lot of money between them; they could only raise the staggering sum of one Euro. Murphy said “Hang on, I have an idea.” He went next door to the butcher's shop and came out with one large sausage. Seamus said...

I have done some research and found out that the 340 I have is a 1973. I know that 72-73 had Cast Cranks in the 340's and they were supposed to be externally balanced but different than the 360 is balanced..... So if it is supposed to be externally balanced but balanced different than ALL...

Does anyone have pictures they can post of their install using summits 3" universal x pipe with TTI headers? I will be dumping it in front of the axle. This is the kit here........ http://www.summitracing.com/parts/sum-642130

I am looking for a New or Used Stock Stroke 3.58" or Stroker 4.0 Forged Crank if anybody has one.

Well I got the itch to get back into the game sooner than my TT Build would be done so I ended up buying this Super Clean 73 Scamp off FABO. It currently has a Stockish 340, a worked over 904 trans and a 3000-3500 stall converter in it. It has 315/50/15's with a Spool and 391 gears in a back...

I know these wheels are a knock off of the Weld Pro Stars but I have a few questions. Looks like the Jegs and Summit versions are exactly the same and may be built by the same manufacturer. Does anyone have these wheels on their cars? Will the drop down center allow for a Disc brake set up on...

How have you guys handled getting rid of all the column shift components when converting to floor shifters? What do you use to get rid of the shift indicator and column shifter to make it look like a factory floor shift column? Anybody done this mod?

Pretty cool old video. 68 Barracuda for the win. Bill "Grumpy" Jenkins at the '68 NHRA Nationals - YouTube

If anyone is interested. http://bangshift.com/bs-productions-live-broadcast-page.html