Roadcuda
Well-Known Member
Does anyone know if the exhaust manifolds from a 66-67, 273s are the same ones used on the '64-65, 273's? I know that the parts numbers will be different but that's not a problem.
Well, how about the alignment of the bolt holes and exhaust port alignment. Is that the same? On the left side of my '65 Commando 273 the manifold angles upwards before it turns down. Do the 67+ manifolds do that also? Thanks again.Rocker dude is correct there are differences, some dump straight back and some dump down. Here is a link to one I had for sale on here a while back, I believe its for 65-66
http://www.forabodiesonly.com/mopar/showthread.php?t=102609
Well, how about the alignment of the bolt holes and exhaust port alignment. Is that the same? On the left side of my '65 Commando 273 the manifold angles upwards before it turns down. Do the 67+ manifolds do that also? Thanks again.
Thanks for the clarification.67 and up point down 64 to 66 wrap around the column and point to the back rather than down.
67 and up point down 64 to 66 wrap around the column and point to the back rather than down.
Cant find a drivers side exhaust manifold for my 65 dodge dart gt. I have a 66 barracuda manifold that dumps down i purchased from mopar charlie. Will it work?
Don't know for sure but in 67 the abody's got bigger so I would guess 64-66 would be the same and 67 and on would be different.
This is the manifold I used on my 63 Valiant with a 318. No clearence issues at all.
Sorry I'm late with a response. The 64-66 A Body 273 manifolds should be the same # 2465847 as shown in silver below. The photo of the rusty manifold is # 2780945 and fits 67-69 A Body 273 /LA318. as you can see the early manifolds point rearward and the later ones point downward. The right side manifolds are the same. #2465769