What Are You Doing To/With Your Car Today?

-
About done

20180630_133525.jpg


20180630_133514.jpg
 
Make sure the car cover is still on correctly.If it wasn't so hot I would finish the door panels and put it up for sale although I keep putting it off in hopes I regain my motivation to finish it completely.:steering::steering:
 
Heat index of 108 here today... Went back to working on the Imp's 440. Rust work will have to wait until it gets a little less hot out there. Wish it fit in my garage!
 
I'm on vacation this week and I just got back from a nice little morning drive in the Cuda....before it gets too hot!

Jeff
 
All done , sent her on her way.
Slam , bam , thank you mame .
$3500. Richer to put in my 67 Cuda notch

20180702_064830.jpg


20180702_064816.jpg


20180702_064822.jpg


20180702_064800.jpg


20180702_064807.jpg
 
Started up the Cuda this morning and smelled gas, so under the hood saw fuel line from carb pump to carb leaking in a couple spots so I replaced the line. Done and done.
 
I went to a findraiser car show at the local Chevy dealer. The ol' girl got a top 25 plaque.
20180708_101320.jpg
20180708_101524.jpg
20180708_115416.jpg
20180708_115512.jpg
20180708_143745.jpg
 
Checked out my lower rad hose with the GoPro. No sign of collapsing at all. Temp is in the low 80's right now, engine temps pretty steady at about 190 after putting in the 180* Tstat.

Still evaluating my tranny temps, but that's a story for another day.......

PICT0001.AVI_000431505.jpg
 
B&m pro stick broke
Swapped it out for the old quick silver (lost all the hardware)
Did some testing
DFD8DB8C-BDD5-4DA4-BB3C-133585833586.jpeg
CB721025-0BFB-4426-A894-2FB0CFF3D8A4.jpeg
0AA4112C-2C26-45A3-83D3-366C311841AA.jpeg


 
Got the front end almost cleared of chrome on the Imp, and got the main bearings so started final assembly on the 440 from it.
 
Spent the day trying to get my B&M shifter under the factory console on my 68 Fastback...not an easy task and tommorrows another day
 
-
Back
Top