Search results for query: *

  • Users: aaadave
  • Content: Threads
  • Order by date
  1. aaadave

    wiper clip

    can someone shoot me a picture of the clip that holds the wiper linkage to the motor crank on a 72 dart? mine came off and apparently dissolved into thin air. lol. thanks, dave.
  2. aaadave

    super six

    just a heads up to any in the mobile, ala. area. there's a 77 aspen with a complete super six set up and complete disk brake set up at barrys u-pull it. dave.
  3. aaadave

    control arm

    this is probably a stupid question, but is an e body lower control arm the same as an a body, and is the disk brake set up on a 73 challenger any better than the m body set up? sending a rusted out 73 chally to the crusher and wondered if i should pull em before it's gone. dave.
  4. aaadave

    42rh

    i have a 42rh from a 92 dakota that's not the original trans. they say the middle numbers of the pan rail no. is the build date. mine is 1206. does anyone know what date this relates to? thanks, dave.
  5. aaadave

    crusin the coast

    well, just about that time again, crusin the coast starts sept. 30. here in mississippi. who all plans to come? looks like this year's gonna be a lot of rain and hurricanes. dave.
  6. aaadave

    roof rail seal

    i changed my 72 swinger doors out for some 73s and cant seem to figure out how the seal fits in the channel. the way their in there now, you cant shut the doors with the window up without it sealing against the outside of the seal. from what i understand, they should seal in the center. i have...
  7. aaadave

    doors

    i'm finally getting around to putting 73 doors on my 72 swinger. when the windows are up, do they sit flat against the outside of the roof rail seal, or do they fit up in the middle? thanks.
  8. aaadave

    compressor

    well, just unloaded a new compressor at the shop. ingersoll rand 80 gal two stage. hope they hold up as good as they used to. on christmas sale for $995. my old devilbiss single stage finally gave up the ghost after 27 years. dave.
  9. aaadave

    barry's u-pull it, mobile. al.

    to all local to mobile al. there's a complete 66 valiant 4 door at barry's u-pull it that doesn't have any dents, and believe it or not, cant find any rust. just letting you know. this wont last long. dave.
  10. aaadave

    dakota drive shaft

    i'm going to use a 42rh from a 93 dakota in my 72 swinger. best i can measure, the shaft from the dakota is about 4 '' diameter. is this to big to cut down for the dart? thanks, dave.
  11. aaadave

    bucket seats

    got a seat question. i know some use the 70's b and e body buckets in the 70-76 darts, but what about a 78 cordoba. seats look the same in picture, just different style of seat cover. there's a set here in real good shape and at a low price i thought about getting for a future project if there...
  12. aaadave

    digital gauges

    just wanted to show how my dart gauges turned out. i know their not every bodies cup of tea, and thats alright, but i wanted to change mine over to digital. made a harness to plug into the factory harness so i didnt have to cut anything out. i can put the old cluster back in anytime by just...
  13. aaadave

    speedometer

    need some help from the ring and pinion gurus. i know i have to change speedo gears, but about what difference would it be on the speedometer if going from 2.76 gears to 2.94s with 26'' tires? just dont want any tickets till i have a chance to change out the speedometer gears. thanks, dave.
  14. aaadave

    [SOLD] sbp slots and tires

    changed out to bbp, so have 4 14 by 7 slots with 2 215-70-14s, and 2 235-60-14s with maybe 1500 miles on em. wheels are in moss point ms. and will be at mopars at the battle ship with them. to heavy to ship. 250$ also have complete 10'' drum set up for $75. pm for contact info. dave.
  15. aaadave

    shout out

    just want to give a shout out and thumbs up to whitepunkonnitro. ( tony), for shipping my parts so fast. makes buying parts a pleasure. was not a for sale ad, so cant leave feed back. figured this would be the next best thing. thanks tony, dave.
  16. aaadave

    power booster

    i've read a lot of threads on using 73 up a body boosters on 72 down, but I've never been able to find out if the 73 up boosters will fit the 72 brackets. i have all the 72 brackets and rods, but the midland booster is shot and the newer ones seem easier to get. I know about booster dewey, but...
  17. aaadave

    belvedere rear end

    well, its finally time to change out the rear end on my dart. started out a 72 dart, slant six, 904 and 71/4 rear end. now has a 5.2 magnum, 904 and same 71/4. i'm going to use an 8 3/4 from a 67 belvedere. i'm still using the original 6 cyl. drive shaft, and i know i'll have to shorten it, but...
  18. aaadave

    antenna

    been thinking about installing an electric radio antenna on my 72 dart. wonder if the hood springs would give me enough room for the motor brace? i've seen them on the back quarters of darts, but to me, they just don't belong there. dave.
  19. aaadave

    hey del

    del,i know this isn't a mopar question, but i know you can probably help with this. i'm changing a 55 chevy with gen. over to an alternator. i know you run the batt. terminal to the battery, but is there any way to use the original idiot light with the alt? if you can give me a hand with where...
  20. aaadave

    fan rotation

    I've got a 72 dart with the magnum engine. want to use the mag. fan set up but the fan is to big for the shroud. the 72 fan will fit the mag. clutch, but doesn't have the reverse rotation. anybody here know if you can install the old fan backwards for the correct rotation? I know I can use a...
  21. aaadave

    clutch fan

    I have a quick question, on a 72 dart, 318, clutch fan, 22'' rad with shroud. is the diameter of the fan 18'' or 181/2'' ? also, what is the least amount of fan into the shroud opening and still pull good? thanks, dave.
  22. aaadave

    mopars at the battleship

    cant believe no one's started a thread yet, anyways, mopars at the battleship in mobile is april 25. only 12 days away. seems to get bigger each year. dave.
  23. aaadave

    weatherstrip

    I'm wanting to put 73 swinger doors on my 72 swinger. I know the 73 weather strip is different, but can you use the 72 roof channel with the 73 seal. cant find a 73 channel anywhere. thanks, dave.
  24. aaadave

    scamp

    just letting those around mobile, al. know, there's a complete 71 scamp at barrys upull it. on hwy. 90. dave.
  25. aaadave

    water flow

    I was just wondering, does the water flow from the water pump to the heater core back to the intake, or the other way around. probably sounds like a dumb question, but I need to know the direction of flow. thanks, dave.
  26. aaadave

    tach

    I was thinking about my magnum 5.2, and was wondering about how to hook up a tach. I don't know if you could hook it up to the coil, or try to tie into the computer. any body done it? dave.
  27. aaadave

    gas mileage

    well, have been able to drive the dart enough to check the mileage. 5.2 magnum, 276 rear, 26'' tires and lock up 904. right at 21 mpg overall driving with full time a/c. not bad considering the old wheezer slant only got 15. they say you could get that out of the old 318s but I couldn't ever...
  28. aaadave

    oil filter adapter

    I'm needing a 90 degree oil filter adapter for my 72 dart 318 magnum. will the mid eighties 5th ave. adapters work ok? dave.
  29. aaadave

    a little info

    well, I'm installing an 01 5.2 mag from a ram pickup in my 72 dart. been told that a van power steering bracket would let you use the old battery tray. great tip. works perfect, but now cant get the van serp. belt to fit cause the ac pulley on the van is smaller than the truck. after studying...
  30. aaadave

    super six

    just thought I would throw this out there, there's a complete super six set up and complete 400 engine at barry's u-pull it in mobile, al. for all you local moparites. was there 2 hours ago. dave.
Back
Top