Search results for query: *

I just bought a 72 demon, it needs wheels and tires. It’s a big bolt pattern in the rear and small in the front. What are you guys doing to make the front big bolt pattern?? Not happy with the selection of small bolt pattern wheels

Hey guys, I just bought a Hughes 3500 stall for mg dart. Installed it and realized the weight is pushed up against the flex plate which is making the flex plate rub the back of the engine. It’s a 360 engine with a 727. My old converter didn’t have a weight on it and I just want to make sure I...

What’s up guys, I just rebuilt my upper and lower control arm. I’m trying to put everything back together and the lower control pin/bolt/pivot won’t tighten up. It’s just spinning inside the bushing. Any idea how I could get this to stop spinning

Whats up guys? I have a 67 dart that I put 72 disc brakes on, every master cylinder i've had on it leaks around the cap. I tried a bunch of stuff to make them stop leaking but no luck. it drips down and leaks in my TTI headers. any advice? i was thinking maybe a plastic reservoir with the screw...

Hello everybody, my good ole 727 is starting to slip pretty bad. Its time for a rebuild i'm wondering if anyone knows of a good rebuild kit. ill be running a 3500 stall with a cheetah full Manuel valve body. any recommendations would be greatly appreciated!

Hey fellas, I’ve been looking into a 150 shot for my 360. Edlebrock rpm power package with 10.1 pistons on stock rods. Anyone ever done that? I just wanna hear everyone’s thoughts? What do you do for ignition system??

Has anybody here ever built a motor for a super charger? The pro charger,torque storm, or paxton. I recently saw a Paxton super charger kit and thought it was cool. It was on Craigslist near me for $1800 still in the box. I believe my current motor has too much compression for boost (10:1) but...

So I went to check timing on my car the other day after a buddy of mine tuned my car a little bit. It has 25* initial and 35 total. It’s a 360. got edlebrock heads and cam with 10.1 pistons. 25* initial seems like a lot to me so I tried to back some timing out of it. The problem is that I don’t...

I am wondering what Carburetors you guys like? I’m running an edlebrock avs2 right now and I like it but I’m wondering if it’s too small for my 360 with an edlebrock top end package. Probably just needs some more tuning.

I am finally going to take my dart to the track for the first time (if governor newsom doesn’t shut the county down) Do you guys have any advice for me? It’s my first time ever taking a car down the track. It’s a 1967 dart with a 360 with flat tops and an edlebrock rpm heads and cam. 727 with a...

I’m looking to make my car handle a little better. I just got a 360 in it’s making some pretty good power now. I know when I get my new torque converter in it’s not going to hook up and it’s going to kick sideways when I launch. I’m thinking some sway bars will help. Anyone have a swag bar kit...

I have an edlebrock 650 avs2 on my new 360 I had built. It has 10.1 compression and the edlebrock power package. I just checked plugs the other day and they are black. Can anyone tell me how I lean it out? Or what you guys have done to get the most out of a edlebrock avs2?

Hey guys I just got some tti headers because I got a new motor for my car. I figured the stock manifolds were killing a ton of power. Do you guys think I’ll feel a big difference or are headers a wasted? 360 10.1 compression edlebrock top and kit. What do you guys think? Also has anyone...

Hey guys I just got my 360 running. Bored .30 over flat tops edlebrock top end kit roller rockers and an air gap. Anyway I got about 500 miles on it and it’s got some kinda ticking going on. Sounds like a lifer or rocker arm? Do you guys usually check your rockers and everything after a break...

I just put a 727 in my dart. It has a cheetah full manual valve body. I took it for a drive today for the first time and Tried to put it in second gear and it completely locked up the rear tires. I loosened up the kickdown band and it’s still really tight. If I put it in 2nd gear it brings the...

Hey guys I’m trying to get my throttle cable to work on my 360 with a edlebrock carb and edlebrock air gap.for some reason I can’t get it to move freely. It was free when I had a 340 edlebrock torquer manifold on it. Does anyone Have pictures of there throttle cable hook up? Anyone helps! Thanks...

Hey guys I am wondering if you guys know what this noise is?? Looking like I’m going to have to rip this thing apart? Here’s my video

I made a post yesterday about my rear end clinking as I spun it with the tires off the ground and no drive shaft attached. I pulled the wheels today and the noise went away. I think it might be something to do with the big adjustment nut in the driver side drum. Is there a way that’s supposed to...

I just installed my 8 3/4 and I was free spinning it is with no driveshaft attached. It’s making a clicking/clunk as I spin either tire. Doesn’t seem to drag or have lots of resistance. Any ideas what this is? Hope it’s not a big problem

Hey guy I just had a 360 built for my dart. It’s a 67 dart with a 72 v8 k member. The mounts are from a 72 but they don’t seems to fit my 1975 360. Does anyone have advice what to do here? Or pictures if their mounts so I can see how you have it?

Hey guys I’m getting ready to do a bunch of work on my 67 dart. I have all the drivetrain from a 72 dart so it has the power steering from a 72 318 car. I am considering throwing a manual gear in the car because the power steering sucks. Has anyone done this and recommend doing it? I know I need...

Hey guys I’m considering point an msd ignition in my 67 dart that I’m putting a 360 in. I’m wondering you If anyone here uses it and if it was fairly easy to install Dodge Mopar 318 340 360 MSD Ignition 6AL Box TSP Pro Billet Distributor & Coil | eBay

Hey guys I’m looking for some motor mounts for my dart. I need something better then the ones I can get on rock auto. Maybe something polyurethane? I just had a 360 built and want something strong. Any recommendations??

Hi guys I just had a 360 built for my 67 dart and I got a 727 for it but I need a converter. I want to run a stock type converter since it will be a street car. I’m willing to drive something with a little bit higher of a stall in it but I don’t want anything crazy. I have the tci flex plate so...

Hey guys I’m wondering what oil pan I need to put my 360 in my 67 dart. Front or rear sump? I’m wondering because I bought a motor without an oil pan and it needs once for the machine shop. I’m pretty sure it’s rear sump?

Hi guys I just bought the edlebrock power package for my 360 I’m having built. I don’t know what to do for rockers and push rods? Any recommendations? I found these Speedmaster PCE261.1181: Mopar Chrysler SB 318 340 360 1.5 Stainless Steel Roller Rocker Arms W/ Hardware | JEGS

Has anyone ever run these? I’m building a 360 mopar with Edelbrocks power package top end. Will they fit my 67 Dodge Dart? Doug's Headers D454: Hdr Mopr A Body SBM 63-66 | JEGS

Hey guys quick question, I got a 360 mopar and I don’t have a flex plate for it. Where can I get one. Here a picture

So I have a 360 from a 75 power wagon. I’m going to have a machine shop clean up the cylinders but I have a feeling they will need to bore it. What’s a good upgrade for pistons? I’ve heard the stock rotating assembly is good but since I will be boring it is like to upgrade but don’t want to get...

so I bought some rallyes for my dart 15x6.5. Went and got some 215/60/15 bf Goodrich radials. Came home to mount them and realized I bought the wrong bolt pattern. I thought my car is 5x4 1/2 but it’s 5x4. Has anyone ever used an adapter to go from 5x4 to 5x4 1/2?? Let me know if you have any...