Search results for query: *

Well I used the search robot on this site and I searched the entire internet for over 7 minutes and am having trouble finding part numbers for our 74 440 with air. I'd like to buy off amazon if possible. Could someone provide me with part numbers for Mopar brand, 4 belts on a 74 440 with...

So, I want to use this to re-install rather than miscellaneous chains hooked on 4 points because that setup generally pissed me off during the pulling process. Amazon.com: Mr. Gasket 33027G Engine Lift Plate: Automotive according to the reviews, one person lifted a 400 Pontiac / 4 speed...

Well I thought I'd share my proper attempt at fabbing a test station. I pulled this engine and trans because we were rebuilding the steering rack and decided to restore the engine bay and put a mild cam in. A few overview pics and then the progression of the test station.

Got a farm truck. Need to crank some lynerd skynerd and other drinkin music. Existing sony explodes are exploding after 8 years of use. looking for cheap (prefer low rms like 30 - 50) 6x9 speakeros maybe 2 way or 3 way, or 1 way. Any decent suggestions? Thanks.

So, can a person take the front half of a BB 727 car trans and mix-n-match parts to get it to bolt up to the transfer case of a ramcharger that came with a 360? So if I have a 87 360 ramcharger and get a 440 and a 727 from a car, can I make lemonade or do I need more parts? I guess there are...

HI, I have been cleaning rusted parts with 50:50 water / muratic and electroplating a lot of them and am concerned a little bit with hydrogen embrittlement. I have read that baking at 400 for 4 hours is a good way to alleviate such issues. Down side is that I read they must be baked very...

Any experience and wisdome would be appreciated: 01 Dakota 4x4 with tape/cd infinity stereo. So, I am looking into a bluetooth head unit and possibly dumping the entire infinity stereo system in my 01 dakota. I have an audio input device (standard headphone jack input) that plays the Iphone...

I own a Mopar, but this is not about a Mopar. I cannot find the far off topic forum. Do we have one? Here goes.. Wax pellet thermostatic actuator like in a cooling system thermostat but in this case connected to the air door in the snorkel. This wax pellet thermostatic acuator controls the...

This fellow from north highlands just gave me a pair of a833 transmissions, one /6 bell, pressure plate and flywheel. One trans is aluminum OD the other I dont know yet. Both are slip yoke. Anyway what a nice thing to do. I answered a craigslist ad about 1 year ago and he responded then that...

Was at a gravel yard looking at gravel for around my shop. I am pretty sure this is a mopar. Has a strange oil pump on it. Maybe a purpose built industrial slant? They have about 10 massive loaders bulldozers earth movers and a bunch of machinery so I imagine they used the hell out of it in...

Hi, I am lookin for a little mopar info. My bud wants to sell me a 360 4x4 dodge 100 truck. He knows practically nothing about cars. He sent me a couple pictures. First off can they be 4x4 and not have a wheel hub locks? Picture looks like front hubs are smooth with the wheel (no hub caps...

Well it is a Mopar. I never was too great with factory equipment stereos. I get by. 01 4x4 dak. I have a factory tape deck Amfm infinity deal. I somehow blew a couple of those factory speakers up. The paper rattles and is cracking. Anyone know a good replacement / upgrade that will match the...

Got my bases done, built one upright. Made where the base and upright will separate. After uprights is rotator heads. Going to put 6 pneumatic casters on it, each rated at 350#. So I can go offroading and drag my rotisserie. So, the pipe is oil well casing 3/16 wall. The angle iron is 3/16...

So, 00 F-150 not being used much, sitting out back in the field for a couple months. Mice been having a celebration in it. How they get on top of a leather seat head rest and piss all over it, is beyond me. Got chewed up particles flying out my vents! Mice droppings everywhere! The Jensen sat...

I equate this song to my Mopar.. Jerry Reed - Lord, Mr. Ford - YouTube "I figured it up and over a period of time, this four thousand dollar car of mine, cost fourteen thousand dollars and ninety nine cents!" ".. gas 'n oil 'n fluids 'n grease, wires 'n tires 'n antifreeze.."...

http://yarchive.net/car/index.html Fuels, ignitions, power, suspensions, carbs, tons of data.

Hi All, I used the search machine but found nil regarding plating in sacramento area. Would anyone recommend a good operation? Mainly I want nickel, blackening, and possibly cad and chrome. The second two less important. Trying to weight out the pain in the butt detail work vs. having...

For all us in the California state, there is someone fighting for our right to hot rod. Not sure if people have posted about this organization previously. Association of california car clubs inc. www.acccdefender.org Anyway I was at this GoodGuys car show in Sacramento, spent 15...

http://www.joegibbsracingoil.com/trainingcenter/tech/JGR_RET.pdf http://www.joegibbsracingoil.com/trainingcenter/learn/racingoil101/index.html From JoeGibbs point of view. I found JG was recommended by Hughes...

Thought I would share this info.. I bought this Birtchin Duster. It is 98 percent unmolested with the exception of a front end accident where some potential maniac welded on a new front clip. New parts like entire front end rebuild very recently, New MP elec IG kit, new clutch on fan, new 2...

Howdy, Well I am looking for crushed glass blasting media (not beads). I am over near Folsom CA. Anyone know where I could pick up a few hundred pounds of the recycled crushed glass? I have heard from my auto body friends that it cuts fast, leaves no residue, does not have byproducts such as...

Howdy, well I am going to buy a new ignition key switch and key cylinder for my Duster column that I am refurbishing. Napa Echlin is 30 percent higher than autozone. Whats ya'alls thoughts on the Napa Echlin brand parts? Are they worth the extra 30 percent? Here are pictures of my quick...

Well, I just started reading this article but I thought, heck why not see if anyone else likes looking at big a** intake manifolds.. http://www.moparmusclemagazine.com/techarticles/engine/mopp_1005_max_wedge_mopp_1005_max_wedge_sixteen_pack_cross_ram_manifold/index.html Sweet!