Search results for query: *

Hey guys, I asked a friend a week or so ago about some decals he has on his car, and said Lance from FABO made them- I am wanting "383 4BBL" hood call outs in the A12 Plymouth "440 6BBL" font for my 383 powered 71 Demon that has a 6 pack scoop fiberglass hood PM or post if anyone can do this...

...the only way it works. But it doesn't work unless the car is moving. Temp will rise fast, and if the car doesn't move it will shoot right up to 220*, and slowly cool down to 180* as soon as you get moving. I had to install an Autometer temp gauge as none of the factory gauges work really...

Looking for suggestions on a nitrous carb'd fuel system.. Going to try to piece together a NICE nitrous setup for my big block 71 Demon over the winter - Have 40amp relays Need everything.. Good electric fuel pump (what rated flow show I look for?) - am looking a Aeromotive A1000 Bypass...

Finally got to drive my 460hp 383 71 Demon! Crappy video sadly but oh well.. the video doesn't do the sound of the car justice at all! also did a test burn out in front of the house! Nice little 40ft test haha. Sadly the rear main seal is still pissing oil (was on the dyno as well) tried to fix...

I'm curious about what mechanical fans people are running? I have a 3 row aluminum rad. with 10" electric fans that I'm not sure if they will keep up.. I tried to fit a oem clutch fan.. but it stuck out to far and was in the rad basically... A friend of mine was saying a Chevy clutch that has a...

Hey guys I bought an FBO ignition box for my Demon - They don't give clear instructions on how to wire in the ballast resistor bypass thing at all. I have a 4 wire resistor.. I don't want to power up my car if it's not done right.. wanting to fire the car for the first time tomorrow and don't...

I need a serious hook up on an FBO or Rev N Nator ignition box.. can anyone help a fellow Mopar guy out trying to get my 71 Demon finished up and need a decent ignition box. I can get an MSD 6AL local for $100 but really don't want the hassle of more wiring..

...dyno'd it yesterday. Sadly I didn't take any of the print outs, but do remember some numbers... Did 8 pulls or so started with 69/75 jetting and 35* total, and ended up with 74/80 and 41* total and a 1/2" 4 hole spacer -all with a 6.5 power valve. Rev'd to 6,100rpm on a few of the pulls...

Which is the best bang for the buck? I did a on Google and here search and am still reading the thread on Moparts about it.. this is for power gains aside, bang for buck reliability.. I just rewired my 71 Demon's engine harness that was previously setup with factory electronic ignition and...

Discount Tire Direct is having a sale on Nitto NT555R 275/60/15 drag radials for $280 shipped a pair! The cheapest they have EVER been! I had to forgo buying carb/car parts to get a pair! Sale ends tomorrow! If you've been considering running Drag Radials on your street car now is the time to...

Hey guys I need to recoup money for my new engine build need to sell a couple things - I have the rebuilt 3310 Holley 750cfm carb off my 383 - was bought localish to me already rebuilt/ ready to go - it was bead blasted, powder coated Gray, and had a Holley rebuild kit put in it. Has manual...

Hey guys I bought everything to swap my 3.23's to 3.73's mostly based on suggestions from a few fella's on here - so I want to hear from guys that run 3.73's or 3.91's even.. will I be able to drive the car on the highway, what are your cruising rpm's, what tire size are you running? 8 3/4...

I work at a GM dealership, and have been searching for a new truck since my 99 5.9 magnum Durango pretty much died. Been looking for almost a year for a 2003 to 2008 Ram 2500 with a 5.7 hemi, and just randomly check my works website, as a 2004 Cummins had come in that was a recent trade in...

Hey guys looking for rockers for my 383 - no Proform - will consider most anything else $400 budget.. PM post what you have!

Hey guys I'm looking to get a set of PRW 1.6 full roller rockers for my 383 build, I'm running the typical cast aluminum Mopar Performance valve covers, and wondering if the rockers will clear the covers?

Hey guys! I'm back as I realized I need to get my *** in gear if I'm to make Mopars in the Park in June.. need to build a motor.. Here's what I got and what I'm hoping to make, with what I have to spend.. 68 383 block - needs full machining but is still STD bore Stock forged 440 crank - needs...

Hey guys, I have a 71 Demon, currently has a decent bb383, that sadly locked up on break in for some reason.. I plan to fix it but not sure I want to put it back in at this point.. I have wanted to turbo the car for some time (after driving a turbo fox body mustang) SO I'm looking for budget to...

Kyosho is accepting pre-orders for these 2 new models due out in late October- early November I plan to buy one of each of the RTR 70 chargers, and at least 2 more bodies! No real specs are given yet - they are powered with Orion's new D-drive brushless 3000kv system, 2.4 radio, as well...

Anyone ever had a intake not fit IE, the bolt holes not line up? I am trying to bolt it down, and gave up after auguring out the holes to 7/16" or so.. I have a 71 383, never been milled, OOTB stealth heads, MP shim head gaskets, Felpro intake gaskets, Edelbrock torker 383 intake..

Post is located in the "78-93 4 & 5 lug fox body platform i.e. Mustang,Ltd,Fairmont & etc..." Car is a clean looking orange 68 Satellite GTX clone, running driving 383 car.. just a heads up for anyone with a clean running driving fox.. go steal it from the guy! I would if I still had my 83...

Anyone looking for a set of 8 NICE 440 6pak rods? I have a set with clean piston pins I'm probably not going to use.. I'd like to get $240 shipped to the 48 states Will post actual pics for anyone interested Here is a google pic of the difference between a 6pak style rod and a standard...

Hey guys I am wanting to relay the head lights in my 71 Demon pretty much right now.. I need to know which wires are FOR SURE the head light wires - I found these in my 68 Dodge Dart/Charger/Coronet factory service manual - found a 71 diagram online and colors are the same Black -...

Need a driveshaft for my Demon - has a 383/727/8 3/4 - I measured 46 1/8" but I'm sure 46"- 46 3/4" will work as well (measurements are center of joint to center of joint) cash or trade - I have 2 good drive shafts - 1 B body from 69 Road Runner, and the other from the slant 6 that came out...

I bought a pair of 1 7/8" headers from a friend he called them TTi's, but they look nothing like TTi's on their site.. any one know what Proparts headers look like? These were in a 440 Dart sport with P/S so they "should fit" a manual steering 383 71 Demon right?

Well long story short had a friend back out on selling me his TTi big block headers - SO I need to buy headers by tomorrow night to get any further on my car, looking at Doug's short deck big block B body headers (link below) These or Summit's as they're the same as Hedman's but with a 5/16"...

Well long story short had a friend back out on selling me his TTi big block headers - SO I need to buy headers by tomorrow night to get any further on my car, looking at Doug's short deck big block B body headers (link below) These or Summit's as they're the same as Hedman's but with a 5/16"...

Hey guys, going out in a bit to start in on cleaning up my the under hood wiring in my 71 Demon. I did a few searches and came up with nothing.. Here is a list of things I want/need to do Relay the head lights - which wires are the high/low head light wires in the harness Rewire factory...

My car has sat for 10 years, and is receiving a new fuel system to handle a big block (all stock replacement stuff) How can I clean the corrosion out of the filler neck so I can use it wit my new fuel system?

My 71 Demon is an original bench seat car, as such it the holes for the bench in the floor, I am installing factory buckets seats, and my floor doesn't have the holes for buckets in it.. Were the floors different from bench to bucket seat cars? there is only bracing for the bench seat holes...

Hey guys I'm getting ready to paint my Dash/doors ect. What were they from the factory - Flat Black Semi gloss Black Gloss Black I am kinda set on gloss Black then cleared over..