Search results for query: *

Haven't been on here in a while but I have a 670 Street avenger on a Mild SBC that is running real rich at Idle. I have read MANY articals saying this is a common problem. Well what the hell was the FIX ! Lol ! nobody actually has said "That fixed my problem Thank You !" most threads end without...

Stupid question on my daughters '65 Barracuda but I have never done a Mopar before. Got the motor (273) back in but do I do Headers (Doug's) first or Trans. first ? Its a 904. any help is welcome. Thanks, Tim

Back working on my Daughters '65 Barracuda and need some recommendations on wheels and tires to compete SCCA CAM-T Solo Autocross car. We already have tubular upper control arms, PST bushings throughout, quick ratio power steering box, tubular sway bar. Most parts are from Firm Feel. We have...

Picked up a 360 out of a '85 Dodge 3500 that was used as a fire station support vehicle. Odometer reads 42,5500 miles. My question is did Chrysler put any "special " heavy duty parts in these ? I am not going into the motor just picked it up as a "spare" for my daughters '65 Barracuda. Any...

Have my daughters V8 '65 BARRACUDA up on jack stands with transmission out and decided to install Doug's headers and need some input as to "What to watch out for" to help me before I get too deep in the wrong direction. Just a good overview would be great from someone who has been down this dark...

I posted this 1st in "early A" discussion and have gotten no response so far. I hope I can get info here. I am putting power brakes on my Daughter's '65 Barracuda with the commando motor and have bought a factory secondary vacuum canister and do not know the best way to mount it. Help ! any...

Back working on my daughters '65 Barracuda ! I am working on the install of factory canister for the brake booster (aftermarket) and need pics of a factory setup to go by so it doesn't look too bad. Vacuum line pics would be great also ! Any constructive input welcome. Thanks, Tim

Like I said I need one for dual exhaust on my daughters '65 Barracuda. Anyone know where I can get one ? Thanks, TIM

Looking to rebuild trunk hinges for my Daughters '65 Barracuda. Anybody know where to get the "Pins" for them ? Thanks, Tim (Dad) :D

I am getting ready to install Engine and Trans. in Daughters '65 Barracuda and don't have a drive shaft. (long story) I wonder if I can get a regular slide yoke, remove stock flange off of stock 904 Trans tail shaft, then run a "regular" style drive shaft to the stock 7 1/4 ? Will the stock...

I found a Inside Hood Latch release from a 70's A body here on the forum for sale and wondering if the Latch assy. is the same for a '65 Barracuda? I would like to have the Hood secure for my daughter when she goes to school so nobody can get to it unless the car is unlocked. Anybody got info on...

I need the bracket to fit a Saginaw PS Pump on the Cast Iron Water Pump that has lower inlet on Driver's side. I have the power steering pump I need, but I have the wrong brackets. Putting it on my Daughter's '65 Barracuda 273 with AC. Thanks, Tim

I have been looking for a while here and on other Forums for a Factory Serpentine setup for my Daughter's 65 Barracuda. I have seen some on Darts but do not know enough about these early A's to know which one will offer the right Hood clearance. I also get mixed info as to which Trucks or Vans...

I posted under "General" questions and did not get any response so I hope it is ok to post here also. What I have is a problem fitting my new 3/8 hard line from tank to stock fuel pump 5/16 nipple on 273 motor. I know I should have looked closer BUT here I am. Do they have a stock pump I can...

DD8 Headers, (Sanderson) are they fitting early A Bodies with power steering like they say they will? if so please elaborate ,got to move forward with my project. Thanks

Performance Distributors (DUI)....Does anyone know if they are still open ? I have been trying to buy a Distributor through a 2nd party (Summit) and I thought they (Summit) were putting me off saying that they could not get in touch with them. I have bought 2 other units from them with great...

I started installing connectors and want to do it right. Emergency Brake Cables run into them and wonder if there is a better route ? Or weld tubing so they will run through them, but the adjuster hits right into the Drivers side connector. Anyone have thoughts on this ? Thanks.

I bought a front Hellwig Sway Bar for my Daughters '65 Barracuda part # 55914 and my end links hit the Aftermarket Adjustable Strut Rods I have already installed on her car. ( bought them from "Ironside" a member here, builds Quality stuff !) I see where if I had stock strut rods they would fit...

'65 Barracuda 273 Factory solid lift cam Commando. Bought "Basket Project" from friend, I am finishing it up for Daughter as Driver "Fun Car". motor and trans. He already built back to factory specs with hardened Valve seats as well as 904 Trans and converter that came with car from factory...

Just wanted to say thankyou to all that have helped us with "Our" project ! Could have not gotten this far without such great Members ! MERRY CHRISTMAS AND A HAPPY NEW YEAR ! Tim (Dad) :thumrigh:

I would like to know the factory spring rate for a stock '65 Barracuda V8 car, not an "S" or anything just plain Jane auto V8 car. Does it vary from left (Drivers side)to right(Pass side)? Please specify if anyone knows. Thanks, Tim (Dad) :-D

I have found a set of stock front and rear sway bars for a 67 cuda, will they fit my daughters 65 cuda? and why? Thanks, Tim :-D

Just got my new Strut Rods and a Fantastic Job was done By IRONSIDE ! My Hat is off to him ! If you need some made send him a PM and ask. He does QUALITY WORK ! I AM going to do more buisness with him as my project comes along with needing Fab work. Thanks IRONSIDE ! Tim (Dad) :thumblef:

I went on Line and filled out their Form to buy Srut Rods for my Daughters '65 Barracuda and never heard back. I also sent "Badart" a PM . Are they still producing parts ? Does anyone know how to get in touch with them? Their stuff looks quality that is why I want a pair. Any Info people...

Daughters '65 Cuda, Factory A/C with 273. I installed Firm Feel power steering Box from manual. Putting later Saganaw pump on motor, can I just swap to Aluminum pump on Motor with pass side outlet? Cast Iron Pump lower outlet hits newer steering pump and factory Mopar Bkts. I got with pump will...

HAVE YOU , no guess ,no hear say, no speculation , no friend of a friend etc. I really need to lay this to rest once and for all. NO OFFENCE TO ANYONE WHATSOEVER ! It is a big game changer for me and alot of money and time but I am thinking of safety first for my build for my Daughter. She has...

F.Y.I. - Found some quality "Looking" Mounts for Daughters '65 Cuda by "Weststar". Made in Taiwan, Good "Fit & Finish" for what it's worth, could break on Start Up but it looks like they made an Effort to make a good one. Just sayin.......

O.K. I'm new to Mopar. What is a Jounce Stop Bumper? Part #52110276 and where does it go ? Putting a Car I bought togeather (some assembly required LOL ) and found this in one of the many Boxes I have full of parts. anybody ? It's pretty big so I don't think it's front suspension....Thanks , Tim

:dontknow: I have been told I need a special Exhaust Manifold if I run power Steering on my '65 Barracuda 273. I need some help. I have changed it over from Manual to Power for my Daughter. The Part number on the Manifold I have is 2465847. Anybody ? Thanks, Tim

I have looked all over and can't find Tight TUBES FOR MY 65 BARRACUDA W/ POWER STEERING NEED HELP ! Thanks, Tim