Search results for query: *

Just noticed today that my fresh air box door when I opened it in the driveway was full of water?? The carpet on the floor was drenched. I think the stupid sponge rubber donut I bought which seals it around the lower cowel pan is leaking. I ran some water in the outside cowl louvers and sure...

Does anyone here know the size and type of screw that goes into the rear of the housing and into the plastic lens of my Demon. I seem to have forgot them. My rear lights are leaking water into the trunk. There are 6 of them on each light and I do not want to use the wrong size and break the...

Why can't I get the chrome interior threaded escution to tighten. The mirror has a tin nut which gets threaded on first. Then the cable end gets inserted in the door hole from within and the chrome nut threads on to the mirror adjuster knob but it hits the tin nut and won't pull tight to the...

All the ads say 71-72 demon. But I understand that there is an actual difference between the two years regarding the rear tailpanel stripes and emblem. Does anyone here have a picture or an explanation of what the difference is and what is the correct for 72 340 demon?

Got the damn thing installed in my demon. two issues. Remote won't tighten in the door. I installed the backup tin nut and when I tighten the chrome flange nut it only goes so far and then is very loose or sloppy on the thickness of the sheetmetal?? Second issue is the cable routing is...

I have a can of DDL9423 low gloss Black. Is this the best match for my 72 Demon scoop and rear wing?? Does this paint need to have a clearcoat?? It is Duracryl Acrylic Laquer... I also have a can of organisol black,, but I would rather have no texture if that is what is correct?? How did...

I installed a wing on my trunk and I find the trunk wants to drop down way too easy. There are 4 slotted holes for the torsion bar adjustment and mine is in the second hole from the front of the car? I am thinking with the wing I need to pull that torsion bar back to the rear of the car but...

Just got a new trunk lock for my car. When I tried to install it the cylinder just goes right through the hole in the panel?? Did these trunk locks have some kind of small escution under the lip of the cylinder to make it a tad bigger?? The hole does not look like it was messed up??

Anybody got one of these at a fair price that was a good working part? I see Year One says theirs are Factory Direct left side only? AMD says they are out of stock. Mine has elongated pin holes which is making the door very sloppy and hard to adjust. I can bush the upper one, but lower just...

anybody post pictures of how to shave the gas cap on my demon so it looks smooth???

looking for the correct clips and screws to install my top to quarter panel at the sail panel trim pieces? How many? Is one of them a screw and nut behind? What about these stud screws I hear about but have never seen? Plastic clips under screws? How many?

Hello, I am getting ready to do the exterior paint. I got rid of the side marker lights as I wanted a cleaner look on the sides. But I keep looking at the spin off gas cap protruding out the rear quarter. I am looking at gas caps for 2014-2015 dodge challengers which are a flip top and they...

I painted the grille light argent. How do I get the black louvers on the headlight bezels to look crisp and clean.

Hi folks, I just installed my hood latch hardware on the demon hood. I adjusted the latch catch all the way up as high as it will go. Close the hood and it does not want to pull and hold the hood tight to the bumpers. Hood appears to be about 1\4" above the fenders up front. Back is flush...

Hi folks, I replaced the lower half of both my quarter panels. In doing so I ended up with a smooth panel inside the trunk which had no sound deadener on it. have tried all the aerosol cans and none seemed to get that rough texture of heavy rubberized sound deadener Mopar used. I came up with a...

AMD lists these for a 72 Duster but not a Demon? Is there a difference between these brackets?

I have two new white nylon square glides for my 72 demon window. These appear to be installed in a lower horizontal metal track but they also appear to be peened over so as to lock them into the track. My new ones seem to have a metal stud of sorts which appear to be a smaller diameter than...

Putting my door back together. Bought new door window wiskers weatherstrip. Snaps into square slotted holes. Do I install this before I slide the glass back in? Seems after the glass is in they may be very hard to install. These things don't come out without destroying them?? I don't want...

Just opened a set of clips and screws I got for the front windshield. There are 17 of one clip and 5 of another one? The 5 appear to have a slightly elongated hole where the fastener screw goes through and all the others have a perfectly round hole for the screw. However my Demon has 8 holes...

Somewhere I saw a video of the quarter window rebuild where the removal of the glass required the studs to be drilled out and replaced with rivets??? Can't seem to locate it now?? Has anybody done that and where did you find a rivet with the correct grip range?? Thanks.....

replaced the inner trunk extension and the lower panel. decided to shave the side marker lights. butt welding is the way to go. takes a little longer but no lap joints to grow rust.

I removed the trim under the rain gutter that holds the rubber gasket seal and has a chrome outer edge to polish and clean. When I pulled it off, it had a black foam double stick on gasket which is about an inch wide. Does anybody here know what it is called and where I can buy it to replace...

My trunk extension is like swiss cheese in one area. Can I change that panel without disturbing the adjacent panels? Would I be better to also buy the lower quarter patch panel and cut that off to better access the trunk extension?

Can somebody here tell me the depth of my Demon spare tire well. I am installing a new bottom and cut the old one out without measuring the depth to get the new one at the right height? I am lap welding the seam and not butt welding. Hope I have it deep enough. Haven't welded yet, just did...

just received a pair. Car is a 72 Demon. My old ones look exactly as what was shipped, except that the shipped ones have a raised bracket with a welded in nut in the center, and my originals have the same welded in nut, but it is not on the raised bracket. It is obvious that this is not...

I am in need of a clean rust free pair of 1972 Demon fenders. What fenders are the same (duster, dart, 71 demon ???) This will help me when looking for these fenders. I suppose there are other cars that use the same fender? Is the 71 and 73 74 the same?? Will Duster fenders be exactly the...

I have a nice 72 demon door which unfortunately is rusted along the lower inside edge where the pinch weld is. I was thinking about cutting off the lower door panel and installing a new lower door patch panel, however, it would require that I also add some sheetmetal to the inside of the door...