Search results for query: *

I bought one of the 09 SRT8 Challengers and love it. Never drove a Viper but sat in a couple of them and they weren't that comfortable. The Challenger handles great and runs great and a lot of fun to drive. It is heavy though and that robs a lot of the power. I am also having a 71 cuda restored...

What's the best way to remove and replace the bushing in the lower control arms? I removed the pivot with the tool I bought from American Muscle but having a hard time getting the bushings out. Any advice appreciated.

I used Reliable Carriers Inc. to move a 70 cuda from Michigan to Texas and was very satisfied with the service. Check their website.

Congrats on the new job, hopefully it turns into something permanent for you. I was wondering why they did not use the oem style quarter on the cuda with all the other parts being changed in that area. Just curious. Good luck with the job.

I used the TTI complete system from headers to the factory style tips out the rear. It was expensive but everything was included that was needed for the installation. Nice fit and sound.

I agree with Rumblefish, years ago the dimmer switch on the floor would go bad and you would lose the high beams. They may work sometime and sometime not.

There is a 4973 TQ on Ebay for $189.00, been watching it being relisted for nearly two months just cant push the buy it now button. It will need a rebuild. Demon Sizzler list one on his site for $245 plus rebuild but I could not get him to reply to my email. I think I will do the same as...

I just ordered about $1500.00 worth of parts from PG classics. I will let you know what the quality of their repo parts are like. All the parts I ordered are for a 71 cuda though. Tallight lense, bezels, side marker lense, bezels and gilled louvers etc. I am surprized the price is so high on the...

Mikel I am still getting the big ocean wave. I am using internet explorer but I am also in Saudi so that may be some of the problem, especially if the picture is of some half naked lady. lol.. Just joking about the pics Bobby. I will be home the first week in September and hopefully get the new...

Mikel, when I open the site it shows a big wave across the top of the page where it says BJR Racing, racing engines and heads. Everything else looks good to me. Dont ask me what browser version I am using because I don't have a clue. lol..

The site is looking good. Not sure about the wave on the home page. Might look better with a car or a shot of the magnum heads or my car or something. lol... Bobby delivered my second motor and a transmission to me back in June for my street car. We had a good time and he did a lot of talking...

Crackedback if Adam does not want the breather you have and it is a 71, I might be interested in it for the 71 Demon I just bought. Let me know.

I just bought a 71 Demon 340 car and it also has the door molding like yours. I was thinking someone added it but looks like it could have come from factory that way after reading your post. Haven't seen a fender tag yet. You have a nice looking car, enjoy it. Mine will be getting a total...

How about some update on the Demon. My past emails show those pics you posted are over 4 months old. Lets see whats going on. lol...

Jerry, I am about 50 miles north of Beaumont near Woodville.

Welcome to the site Mike. Lots of good folks here. Should have a transport company lined up by the middle of the week to bring the Demon to Texas.

I have two sets of the TTI's and love them but if you are on a budget the Hedmans are good for the money. The next set my street car (74 Dart Sport) gets will be Hedmans. They are a bit of a pain to install but not as bad some people make them sound at least my last two sets were not. You may...

Nice run Len. I'm also a believer in the Dominator.

Check Goodmark Industries site. I bought a couple of their panels for my 72 demon and were very good quality. I have bought some from others for challengers that were wavy and could not use the whole panel or would have been more trouble than worth to straighten.

Thanks Barry I'll try it. Andy

Where do you buy one of these programs and which one would you guys recommend?

I should probably leave this alone but in BJR's defense I really think he is getting the raw deal here. Strokin 408 could it be that you over revved your motor and bent some valves. I missed a gear once and hit 8000 rpm and bent 5 out of 8 exhaust valves. When you tore the motor down could you...

Strokin, I'm sorry to hear you are having problems with your heads but as you and I talked before I have some heads and engine I bought from him that are working great. It sounds like someone has given you this info but like fishy says a lot of shops will bash others. I hope you contacted BJR to...

There are plenty of good engine builders on this site but if you are going to be in the Atlanta area I would check with BJR Racing as he will be near to you. I bought an engine from him a couple of years back and well satisfied with it. I live in Texas but he will probably build my next engine.

I would definitely go with the W5s over the W2s. No comparison in the two in my opinion. It Depends on how fast you want to go and how much money you want to spend for the blocks. I am running a best of 10:59 at 127mph in a 3000 lb car with the 360 W5 head engine I bought from BJR. The engine is...

I also installed the complete 3" TTI exhaust which included the headers to the factory style tips on my 74 Dart Sport and love the fit and the sound. The wife actually told me it was a little to quiet for the track though. She says if your going drag racing you got to make more noise than that...

Jim, if you are interested in selling the 71 340 (only need a bare block) and it is rebuildable I might be interested in it to go back in my 71 cuda. If you want to have a spare 340 sitting around and do not care about what year, maybe we could do some trading as I have a 72 and 73 block. Andy

I dont know what combination you are going to build but will tell you my combo. It is a 360 W5 engine that runs 10.59 at 127mph at 3000lbs. I am running 31x13.5 tires with a 4.56 gear, shifting at 6200 and crossing the line at 6500. When I put my 28" tires on I would cross the line at 7000 with...

My wife ordered mine yesterday or so she said it was mine. The chances of the average guy getting an 08 is slim. The dealer she ordered from said they will only get one, probably around June of 08 and it will also be auctioned on E-bay. The price was not fixed, the dealer said it will be between...

My wife bought me the bottomsup 2000-3000 a couple of years ago but she never put it together yet. I opened the crate and it looks like good quality work. If I had it to do over I would get the powder coated option though. Hopefully I will get to use it in the near future. It's just like an...