You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
Been working on a Classic Auto Air install in my 340 Demon for about a month now. It's way too hot here to drive these cars this time of year, so...
-
This will be a sticky and be locked when done. Please begin another thread for comments. Thanks.
I am building this 850 Thermoquad for Jeremy...
-
Ok I am going to try this to help anyone wanting to go Duster to Demon. I am converting a 75 Duster so other years may not be the same but should...
-
This unit is a TCI 4 bolt unit. Since no instructions are provided with this. It really was simple. And for $75 a worth while upgrade.
Tools...
-
Since our friend NightMoves was burglarized, I offered to send him a carburetor. So, I thought what better time to to do this than now? I am going...
-
I started rebuilding my tranny so I thought that I would post some pics of the process for those thinking about trying this on their own one...
-
We all know hose clamps are ugly. So with some 1/2 inch heat shrink you can cover them.
To me it's all about the detail.
-
Here's a few good diagrams to help you move your battery to the trunk with a power kill switch.
-
Well.... Before I started installing my carpet , I had looked around and there really isnt any carpet install guides here on fabo for our cars. I...
-
Here's a new and easier way to remove/install the spring on the clutch pedal. ......Note this only works with the pedal assembly out of the...
-
I am going to do a quick write up for you guys on this conversion I just did to my Duster.
Its great for those of you who are installing a 4...
-
Here's a blueprint to construct a trailer hitch from out of my '69 Dart Owner's Manual.
Should work for 1967 and 1968 Darts as well.
-
Many of you know that when you install a 440 or RB block in our A-bodies that there is often trouble getting the right valve cover off if the car...
-
I just thought this might help some else out.
First you have to unhook all the cables under the driver side floor board, then what I did was use...
-
This will be an ongoing thread with how to pics and some words typed to make the pics interesting (kinda like playboy magazine) but for stainless...
-
Well I needed to recode a door lock for the passenger & drivers side of the Dart so I took some pics and am doing a mini write up.
I started by...
-
For the benefit of many of you wondering how to stop a typical leak
through worn out and deteriorated wiper pivot seals, I am providing
the...
-
ok here is a breakdown of the high impact color production numbers by model. it is only the the percentages. these precentages will need to be...
