Search results for query: *

I have a 68 barracuda and this deal just seems to be too good. Does it look a little funny to anyone else or is it just a good deal...

I am looking at a 360 with this set of heads on it casting number 2858920-6. The owner of the engine does not know much about it as he acquired it from a shop he worked for. He told me the heads are from a 318 but he has them on a 360. I'm not sure about what he has going on. I will probably...

this is my wifes and my restore. It will take a long time but bare with us and we will keep you updated. Thanks. as it sat

I am looking to buy an engine from a guy but he does not know what type of pistons it has in it. He had a shop build him the short block a couple of years ago and he does not remember what pistons they used. He told me it was either KB or Speed Pro. I can tell the difference from dish dome or...

Sorry if this has been posted already. I saw this at work and had to post it. Incidents with Pedestrians. The pedestrian ran for the pavement, but I got him. The guy was all over the road. I had to swerve a number of times before I hit him. I was sure the old fellow would never make it to...

Finally after a couple of years of owning the car I get to take it out of the field and bring it home to start to put it back together. It is in bad shape and I have my work cut out.

Hello, I need some help with Pay pal. I have not used it in a lot of years and it is all different. I have some questions about it. The answers are not easy to find on their web site. LOL 1. Do I need to get a Premier account or a personal account to buy and sell stuff? 2. Does it cost to...

I am in need of a good machine shop from Spokane, Wa or Courd A'Lene, Id. Also a good head shop that is not overly expensive that does a good valve job.

Hello, I am in need of a few cheap parts for a 360 engine. 1. Center sump oil pan 2. RPM AIR GAP intake 3. Holley Street Avenger 670cfm 4. 3.91 rear gears for a 8.75 489case with a suregrip(just the ring and pinion) Im sure their will be more needed. LOL anything will help...

I need to learn a bit on balancing a 360 engine. Does the machine shop need the block to do an internal balance or can I just bring the crank pistons and rods?

What side of the radiator should the inlet and outlet be on a radiator for a 360? I do not have the motor here to look at yet and have a chance to buy a cheap radiator if it will work.

I have a Holley 700 double pumper part number 4778-2 that has been sitting for a couple of years in the shop. I am wondering if I should sell as is or rebuild it and sell it for more. I would also like to know what I should ask for it either way. Thank you. Brad

This is the third time this happened to me. Thankfully I know better now. I put something on Craigslist and I get an Email that like this one hello, is the item still available? daren Then when I respond and tell them it is, I get a response like this one. Thanks for the prompt...

I think this might be the right place to ask. I am in need of new tires on my 68 Barracuda fastback. I cant afford new wheels so I am after tires for a 14 inch wheel. I need cheep tires and the only size I can find in my price range are a bit narrow. Would these tires be OK for street and...

Help please. LOL I have a 1968 Plymouth Barracuda. The car had a 318 and now I am installing a 360 mild build. I no longer have the original radiator. I am looking for a cheap one that will work in this car. My problem (this is where I am hoping someone here can help) is I don't know what...

I bought a Holley 650 a couple of years ago and never took it out of the box. I asked for a Holley 650 double pumper but before it arrived I sold the vehicle it was going on. The part number on the box is 0-80783S, and description of mechanical secondaries and manual choke. My problem is I am...

On a 360, if you deck the block to make the pistons at 0 deck height, what else has to change or be machined? Will the push rods work and the intake line up? Please all the info I could get would be great. Thank you Brad

I am wanting to know what the pros andcons of solid lifters are over hydrolic. If you can help please let me know.

I have a 68 Barracuda with a 360 and a 727. I need a new torque converter. What is the best converter under $300 (or as cheap as I can get) that is worth spending the money on. Also I am not sure what stall I should get it at. I am spending over half the time at the track but does need to be...

I am doing some light street driving(very little) and over half the time on the strip. In a 360 which cam is better performance with KB 107 pistons and J heads. http://www.summitracing.com/parts/LUN-60403LK/ OR http://www.summitracing.com/parts/CCA-CL20-223-3/ Thank you

Are any of you watching the UFC 100 this weekend? The only thing I like as much as Mopars is MMA.

Not mine but I want it if only at a different time. What do you think? http://spokane.craigslist.org/cto/1253337155.html

I am new to the performance world and wanted to know what the difference is between a single and dual plane intake. Why is it not recommended to use a single plane on the street?

I am swapping a 4 speed manual to a 727 floor shift auto. I need some pics of a floor shift auto trans tunnel so I know what I need to do to mine. I was told to get some sheet metal and hand bend in into place then tack weld it in. I am putting a floor console in so I need it to look the way it...

I am swaping from a A833 to a 727 in a 68 Barracuda. Do I need to shorten or lengthen the driveline? Also will the yoke from the A833 work on the 727?

Anybody going to the NHRA in Spokane, Wa this weekend? I am taking the whole family including the inlaws.

I took a set of heads into the shop to have them magged and the shop told me pressure testing is better and they did not do that but told me where to take them. My question is does this sound normal to you guys? I have not herd of it, I have allways been told to get them magnafluxed.

Is their a difference between a 318-727, 340-727 and 360-727. I am doing a swap and need to know if their is a difference between the trans in the 318, 340 and 360 or are they all the same.

68 Barracuda 8.75. I am going to spend 40% on street and 60% strip. I have 3.23 now and want to change. Is it better to go with 3:55 or 3:91's. I will be running 235/60R14 with a 360 and a 727.

I wanted to know what size tire I could use on a 68 Barracuda fastback. I am running in the rear a 245/60r14 and in the front a 195/70r14. I dont want to use a 245 in the rear because it is hard to find and expensive. What other size would fit in it and look good?