Search results for query: *

Up for grabs is a rare set of 915 440 heads , one year only produce . comes complete with adjustable rockers , heads have double springs , bronze k liner ,2.08 intake and 1.88 exhaust valves , port work .this is a killer set of close chamber heads . I'll take cheap price of 1000.00 I'm...

Looking to trade for a barracuda or a BBody 40 over 360 whiplash cam set , roller rockers,holly carb , 727 trany ,tci stall ,hooker headers , 2 1/2 exhaust ,front disk brakes, 8 3/4 ,super stock springs , ball joints ,bushings ect. 17 inch wheels , tinted windows . Hemi scoope , gowing ect...

Question what is measurement on a 30 over 360 piston ? Is it 4.030 ? Or is the 4.030 the bore size for the piston ???

68 valiant , started out as a grandpa car With 273/904 , 7 1/4 rear , drum brakes, 13 inch wheels When I got it had 72,000 miles ,I tinted windows and added stripe to give it a better look , 4 months later it hit 76,000 I pulled motor and trany , pulled rear end, pulled drums off front ...

I have 2 cranks from 360 4027169 with cfd cast into it and a 3418640 . Are both crank the same or is one better ? I'm planing on building a 78 year block and want the better one of the two

I picked up a 85 360 tore it down and notice 6 rods had 2899496 pressed pin and 2rods cylinder 3and5 had 3418645 pressed pins also is this right or have someone been in this block ? Crank number 20277169 , block number 4179930-360-2 , could some one help me , the 6 rods showing they are 340...

I have a 360 block I used a digital caliper on piston bore , reading I got was 4.035 is this in specs of being 30 over ?? Thanks

I picked up a 360 block and crank dispose to be 30 over bore is the piston hole should it be 4.030 when measureing it ? Also is the walls bad it have lines running in it , I can't feel them hand not groves in walls

Good set front and back sway bars off 67 Barbuda take 80 for both

68 valiant , factory v-8 car ,76,000 miles on body ,rust free , super solid . lots new parts just added needs minor things done and front end aliment. new super stock springs, 8 3/4 rearend , 294 gears, axle berrings, brakes and hardware, ujoints, exhaust, hooker headers, front disk brakes, 360...

i got my 360 done, it is a 78 model four barrel motor ,im running a hughes whiplash cam 504/515 with matching springs ,locks retainers,and lifters, i installed comp pushrods. the motor have the self adjusting rockers arm with shaft. (factory) . the motor started right up and sound decent other...

I did a disk brake swap on my 68 valiant I used all parts from 73 duster I also use duster proportioning valve . I'm bleeding brakes but I get no fluid to the back, I took line off proportioning valve but no fluid comes out even when i hit peddle. Is valve bad ? Any idea on fix ? Any help would...

Help with ride heigh , the bolts under bottom aarm that you turn to lower or raise front end are the bolts dispose to be turned equal turns from each other ? I adjusted mine and one bolt looks longer , is this right ?

got my back wheels on valiant, running a 235/50 /17 on back with 6 inch back space and 9 inch rim , i fitted them on front but hits the tierod end, so front will be getting 17x8 with 4 1/2 back space should do it. i put 8 3/4 rearend in from a 66 charger. and running a super stock spring ,im not...

I added a 8 3/4 rearend to my abody , I measure from front of drum to side of spring and came up with 7 inches , question is would a 6 inch back spacing rim with tire on work with out rubbing or should I go with 5 1/2 ?

I love playing on cars but get bored too easy so I sell or trade them and start all over again, this time I have a 68 valiant 2 door factory v8 ,manual brakes with power steering. Guy I got it from was sec. Owner I looked the car over and I was like dam real clean for mopar, paid guy ,called...

What is about the leanth on drive shaft in a 68 valiant 2 door with 8 3/4 rear and 727 trany ? Or best way to measure shaft

73 duster , door tag says 9/72 ,no motor or trany , 8 1/4 rearend , I took disk brakes off front and put my drums back on, good glass, steering colum, dash I'll post better pictures later this weekend take 1000,00 comes with bill of sale. This was a 318 car with power steering ,a/c, power...

68 Plymouth valiant factory v8 car , 273/904 . 76000 miles ,the motor and trany was pulled and 360/727 was installed. 273/904 can go with car and all other original parts. 360 was rebuilt ,whiplash cam set with springs installed with lots other parts, trany was rebuilt and tci breakaway...

I have a 68 valiant with 904 trany , I pulled the 273/904 out and installed a 360. With 727 trany , on the 904 trany on side there is a wire I would guess backup light. On 727 trany there is a black , orange, and green could I change the part in trany or what does my wire from harness hook to ...

Any difference in manual or power disk brakes ? Which is better .? I'm converting my drums to disk off a 73 duster to a 68 valiant and want best for car any help be greatfull

I have a 68 valiant , I'm installing a Bbody 8 3/4 rear end, does anyone know what back spacing on the rims I would need ?? 5 1/2 - 6. ? Have any one put a Bbody rear end in their abody could check for me ? Thanks

Question , I have a 68 valiant, will the disk break setup on a 72 duster work on my car ? I have read from 73 to 76 would ,but wondering if setup off 72 will work being I just picked up doner car. Any help be greatfull

i just picked up a rearend was told it came out of a 66 charger , perches are 44 center to center, gears are a 2.94 ,by looking at pictures is this an open rearend or posi ? any help would be great full

i have 68 valiant pulling the 273 to replace with 360 , im changing the rearend to a 8 3/4 ill be useing the bbody rearend, ill be putting new a body perches on and moving in 1/2 on each side to bring 43 center to center. my question is have any one done this to their valiant ? i need to know...

what all i need to do to install a bbody rearend in a abody ? will it work? i know drive shaft will need cut, could i just put in in and spread springs 1/2 inch on each side for perch ???

78 360 four barrel motor, 596 head casting smog holes pluged off, double roller timing chain , hughes whiplash cam 504 intake / 515 exhaust with 1.5 rockers matching springs,locks,retainers, alum dual plane intake, my trany is 727 with tci breakaway converter, what size carb should i use with...

i have a 78 360 with 727 trany , the motor is external balance , i have a tci breakaway stall converter i want to install to this setup, being external balance do i need to change the flex plate or buy weights to weld to converter ,i notice factory converter have a weigh add to it. if i need to...

i have a converter with stamped ( cce hs 9 99 6440 ) is this a 1000 above stock ? aftermarket ? i was told it was a tci breakaway any help on this converter would be greatfull

im installing a 360 in my 68 valiant ,the car have a 273 with 904 trany in it now. i bought a 78 rv with a heavy duty 360 and 727 trany which would be a better trany for the 360 ?